Subversion Repositories svn.mios

Rev

Rev 1089 | Rev 1117 | Go to most recent revision | Show entire file | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 1089 Rev 1113
Line 9... Line 9...
9
9
10
10
11
<H2> <IMG SRC="images/bullet.gif" ALT=""> Step by Step </H2>
11
<H2> <IMG SRC="images/bullet.gif" ALT=""> Step by Step </H2>
12
12
13
<UL CLASS=CL>
13
<UL CLASS=CL>
14
  <LI>it's assumed that you already tested the USB MIDI communication by pressing the Query button in MIOS Studio as explained in the <A HREF="mios32_bootstrap_newbies.html">Bootloader page</A> - you should get some informations about the chip and the running application.<BR>
14
  <LI>it's assumed that you already tested the USB MIDI communication by pressing the Query button in <A HREF="mios_studio.html">MIOS Studio</A> as explained in the <A HREF="mios32_bootstrap_newbies.html">Bootloader page</A> - you should get some informations about the chip and the running application.<BR>
15
      If this procedure sounds unfamiliar to you, please follow the hardware test procedure first as explained in the <A HREF="mbhp_core_stm32.html">MBHP_CORE_STM32</A> resp. <A HREF="mbhp_core_lpc17.html">MBHP_CORE_LPC17</A> page.</LI>
15
      If this procedure sounds unfamiliar to you, please follow the hardware test procedure first as explained in the <A HREF="mbhp_core_stm32.html">MBHP_CORE_STM32</A> resp. <A HREF="mbhp_core_lpc17.html">MBHP_CORE_LPC17</A> page.</LI>
16
  <LI>download the latest midibox_seq_v4_* release package from the <A HREF="mios32_download.html">MIOS32 Download Page</A>.
16
  <LI>download the latest midibox_seq_v4_* release package from the <A HREF="mios32_download.html">MIOS32 Download Page</A>.
17
  <LI>unzip the .zip archive</A>.
17
  <LI>unzip the .zip archive.
18
  <LI>load the project.hex file with the "Hex Upload" window of MIOS Studio and press the Start button</A>.
18
  <LI>load the project.hex file with the "Hex Upload" window of MIOS Studio and press the Start button.
19
  <LI>the new firmware will be transfered to your MIDIbox</A>.
19
  <LI>the new firmware will be transfered to your MIDIbox.
20
  <LI>once the "Upload completed" message is displayed by MIOS Studio (after ca. 20..30 seconds), your MIDIbox will reboot, and the new firmware will be started.</A>.
20
  <LI>once the "Upload completed" message is displayed by MIOS Studio (after ca. 20..30 seconds), your MIDIbox will reboot, and the new firmware will be started.
21
</UL>
21
</UL>
22
22
23
23
24
<H2> <IMG SRC="images/bullet.gif" ALT=""> MBSEQ_HW.V4 </H2>
24
<H2> <IMG SRC="images/bullet.gif" ALT=""> MBSEQ_HW.V4 </H2>
25
25
Line 27... Line 27...
27
27
28
<P CLASS=DESC>As long as no SD Card is connected, or the file cannot be found, the standard V4 definitions will be used as documented in <A HREF="http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fstandard_v4%2FMBSEQ_HW.V4">hwcfg/standard_v4/MBSEQ_HW.V4</A>.</P>
28
<P CLASS=DESC>As long as no SD Card is connected, or the file cannot be found, the standard V4 definitions will be used as documented in <A HREF="http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fstandard_v4%2FMBSEQ_HW.V4">hwcfg/standard_v4/MBSEQ_HW.V4</A>.</P>
29
29
30
<P CLASS=DESC>If your MIDIbox is based on <A HREF="http://www.midibox.org/dokuwiki/doku.php?id=wilba_mb_seq" TARGET="_blank">Wilba's frontpanel</A>, please use <A HREF="http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4">hwcfg/wilba/MBSEQ_HW.V4</A>, otherwise the dedicated button and LED assignments won't work (see also special chapter below)!</P>
30
<P CLASS=DESC>If your MIDIbox is based on <A HREF="http://www.midibox.org/dokuwiki/doku.php?id=wilba_mb_seq" TARGET="_blank">Wilba's frontpanel</A>, please use <A HREF="http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fsequencers%2Fmidibox_seq_v4%2Fhwcfg%2Fwilba%2FMBSEQ_HW.V4">hwcfg/wilba/MBSEQ_HW.V4</A>, otherwise the dedicated button and LED assignments won't work (see also special chapter below)!</P>
31
31
32
<P CLASS=DESC>The MBSEQ_HW.V4 file can be edited with a common text editor.</P>
32
<P CLASS=DESC>A matching file can be uploaded with the Filebrowser which is integrated into <A HREF="mios_studio.html">MIOS Studio</A>.
-
 
33
<CENTER><IMG SRC="mios_studio/mios_studio_filebrowser.png" width=952 height=550></CENTER></P>
33
34
34
<P CLASS=DESC>It will be loaded (only once!) after startup. In distance to other configuration files, it won't be loaded again if the SD Card is reconnected to avoid sequencer hick-ups during runtime, and to cover the special case where files should be loaded from a SD card which contains a MBSEQ_HW.V4 file for a different hardware.</P>
35
<P CLASS=DESC>The "Update" button retrieves the directory structure. Once it has been read, files and directories can be selected in the directory tree.<BR>
-
 
36
Existing files can be downloaded to your computer at a speed of ca. 40..50 kb/s.<BR>
-
 
37
New files (like the MBSEQ_HW.V4) can be uploaded from your computer at a speed of ca. 10..20 kb/s.</P>
35
38
36
<P CLASS=DESC>Procedure to modify the configuration file:
39
<P CLASS=DESC>You can use the integrated EDIT function to modify the MBSEQ_HW.V4 file for your needs. Push the SAVE button to store your changes on SD Card.</P>
37
  <UL CLASS=CL>
40
38
    <LI>ensure that the USB cable is connected to your PC/Mac
41
<P CLASS=DESC>The file will be loaded (only once!) after startup. In distance to other configuration files, it won't be loaded again if the SD Card is reconnected to avoid sequencer hick-ups during runtime, and to cover the special case where files should be loaded from a SD card which contains a MBSEQ_HW.V4 file for a different hardware.</P>
39
    <LI>go to Utility->Disk and activate MSD mode
-
 
-
 
42
40
    <LI>wait until your operating system detected and mounted the SD Card
43
<P CLASS=DESC>This means, that you've to power-cycle the core module to see the effects of your changes.</P>
41
    <LI>open to the root directory of the SD Card and edit the MBSEQ_HW.V4 file with a text editor (e.g. Wordpad under Windows)
44
<P CLASS=DESC>Alternatively - and this is the preferred method - just enter <I>reset</I> in the MIOS Terminal to restart the application.</P>
42
    <LI>unmount the SD Card (don't forget this, otherwise it can happen that your OS doesn't update the file!)
-
 
43
    <LI>in order to load the new configuration, power-off/on your MIDIbox
-
 
44
  </UL>
-
 
45
</P>
-
 
46
45
47
46
48
<H2> <IMG SRC="images/bullet.gif" ALT=""> Initial setup for Wilba's Frontpanel </H2>
47
<H2> <IMG SRC="images/bullet.gif" ALT=""> Initial setup for Wilba's Frontpanel </H2>
49
48
50
<P CLASS=DESC><A HREF="http://www.midibox.org/dokuwiki/doku.php?id=wilba_mb_seq" TARGET="_blank">Wilba's Frontpanel</A> uses a special button/LED layout which is not compatible to the standard frontpanel. Accordingly, you won't be able to access the intended button functions as long as the standard assignments are active (e.g. no SD Card connected).</P>
49
<P CLASS=DESC><A HREF="http://www.midibox.org/dokuwiki/doku.php?id=wilba_mb_seq" TARGET="_blank">Wilba's Frontpanel</A> uses a special button/LED layout which is not compatible to the standard frontpanel. Accordingly, you won't be able to access the intended button functions as long as the standard assignments are active (e.g. no SD Card connected).</P>