Subversion Repositories svn.mios

Rev

Rev 1186 | Rev 1188 | Go to most recent revision | Show entire file | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 1186 Rev 1187
Line 258... Line 258...
258
<P CLASS=DESC>The line driver can also extends J19 (for AOUT module) + J8/9 (for additional DOUT and DIN modules), so that not only DOUT based gates, drum triggers and clock outputs can be made remotely available, but also for external modules such as the <A HREF="http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb" TARGET="_blank">TPD</A>. Two additional pins are reserved for a DIN Sync clock and start/stop input (not implemented yet!).
258
<P CLASS=DESC>The line driver can also extends J19 (for AOUT module) + J8/9 (for additional DOUT and DIN modules), so that not only DOUT based gates, drum triggers and clock outputs can be made remotely available, but also for external modules such as the <A HREF="http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb" TARGET="_blank">TPD</A>. Two additional pins are reserved for a DIN Sync clock and start/stop input (not implemented yet!).
259
259
260
<P CLASS=CL>See the <A HREF="mbhp_line_driver.html">MBHP_LINE_DRIVER</A> page for additional information.</P>
260
<P CLASS=CL>See the <A HREF="mbhp_line_driver.html">MBHP_LINE_DRIVER</A> page for additional information.</P>
261
261
262
<P><CENTER><IMG SRC="mbhp/mbhp_line_driver_aout_ng.jpg" width=550 height=348></CENTER></P>
262
<P><CENTER><IMG SRC="mbhp/mbhp_line_driver_aout_ng.jpg" width=550 height=348></CENTER></P>
-
 
263
-
 
264
<P CLASS=DESC>Here a MBSEQ_HW.V4 configuration example which works with the MBSEQ Frontpanel PCB:
-
 
265
<TT><PRE style="margin-left:20px">
-
 
266
##################################################
-
 
267
# CV and Gate/Trigger/Sync Setup
-
 
268
##################################################
-
 
269
-
 
270
# the 8 CV gates can be assigned to a shift register (0=off, 1-32: number of shift register):
-
 
271
# - 1st CV Gate available at DOUT SR output D7
-
 
272
# - 2nd CV Gate available at DOUT SR output D6
-
 
273
# - 3rd CV Gate available at DOUT SR output D5
-
 
274
# - ...
-
 
275
# - 8th CV Gate available at DOUT SR output D0
-
 
276
CV_GATE_SR1   3
-
 
277
-
 
278
# and DIN Clock Outputs can be assigned to a shift register as well (0=off, 1-32: number of shift register):
-
 
279
# D7..D0 will output individual clock or start/stop signals which can be configured in the CV configuration page
-
 
280
CLK_SR        4
-
 
281
-
 
282
# additional gate triggers are available on common digital output pins of the
-
 
283
# DOUT shift register chain - they are assigned to AOUT channel #16 (Note C-1, C#1, D-1, ...)
-
 
284
# define the shift registers which should be used here (each provides 8 gates)
-
 
285
# Note that SRs assigned to this function cannot be used as LED outputs (exclusive function)
-
 
286
# Allowed values: 1-32, 0 disables the function, all other values invalid and not allowed
-
 
287
DOUT_GATE_SR1   5
-
 
288
DOUT_GATE_SR2   6
-
 
289
DOUT_GATE_SR3   0
-
 
290
DOUT_GATE_SR4   0
-
 
291
DOUT_GATE_SR5   0
-
 
292
DOUT_GATE_SR6   0
-
 
293
DOUT_GATE_SR7   0
-
 
294
DOUT_GATE_SR8   0
-
 
295
</PRE></TT></P>
-
 
296
-
 
297
<P CLASS=DESC>The gates are available at the 3rd DOUT shift register, the clocks at the 4th DOUT shift register, and additional gates/drum triggers at the 5th and 7th DOUT shift registers. This works, since Wilba's Frontpanel PCB only uses two DOUT shift registers; a MBHP_DOUTX4 module connected to J2 of the PCB will represent SR 3, 4, 5 and 6.<BR>
-
 
298
If more gates are required, just add another MBHP_DOUTX4 module and assign the number 7..10 to DOUT_GATE_SR3..6 accordingly.</P>
263
299
264
<H2> <IMG SRC="images/bullet.gif" ALT=""> Ethernet Interface </H2>
300
<H2> <IMG SRC="images/bullet.gif" ALT=""> Ethernet Interface </H2>
265
301
266
<P CLASS=DESC>An Ethernet port can be optionally added to send and receive OSC messages. It requires a <A HREF="mbhp_eth.html">MBHP_ETH</A> module. Details about the possibilities are explained <A HREF="midibox_osc.html">at this page</A>.</P>
302
<P CLASS=DESC>An Ethernet port can be optionally added to send and receive OSC messages. It requires a <A HREF="mbhp_eth.html">MBHP_ETH</A> module. Details about the possibilities are explained <A HREF="midibox_osc.html">at this page</A>.</P>
267
303