Subversion Repositories svn.mios

Rev

Rev 163 | Go to most recent revision | Show entire file | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 163 Rev 931
Line 53... Line 53...
53
      <TD><IMG SRC="mbhp/mbhp_core_3.jpg" WIDTH=280 HEIGHT=379 BORDER=0 ALT=""></TD>
53
      <TD><IMG SRC="mbhp/mbhp_core_3.jpg" WIDTH=280 HEIGHT=379 BORDER=0 ALT=""></TD>
54
      <TD CLASS=TABCOLOR2>Mount the parts. This picture shows two types of sockets: 1-row and 2-row SIL headers (for example J3, J4, J15...) and special connectors (J1, J2, J5, J12, J13...) which are available at Reichelt (called printplugs (="printstecker" in german). But don't get confused, SIL headers can be used for every port.</TD>
54
      <TD CLASS=TABCOLOR2>Mount the parts. This picture shows two types of sockets: 1-row and 2-row SIL headers (for example J3, J4, J15...) and special connectors (J1, J2, J5, J12, J13...) which are available at Reichelt (called printplugs (="printstecker" in german). But don't get confused, SIL headers can be used for every port.</TD>
55
    </TR>
55
    </TR>
56
    <TR>
56
    <TR>
57
      <TD><IMG SRC="mbhp/mbhp_core_4.jpg" WIDTH=280 HEIGHT=210 BORDER=0 ALT=""></TD>
57
      <TD><IMG SRC="mbhp/mbhp_core_4.jpg" WIDTH=280 HEIGHT=210 BORDER=0 ALT=""></TD>
58
      <TD CLASS=TABCOLOR2>Don't forget the 6th bridge, which has to be soldered between the SC pin of J4 and <B>Pin #28</B> of the PIC (was Pin #22 in earlier MIOS releases and PIC16F based projects). An isolated cable is recommented!</TD>
58
      <TD CLASS=TABCOLOR2>Don't forget the 6th bridge, which has to be soldered between the SC pin of J4 and <B>Pin #28</B> of the PIC (was Pin #22 in earlier MIOS releases and PIC16F based projects). An isolated cable is recommended!</TD>
59
    </TR>
59
    </TR>
60
    <TR>
60
    <TR>
61
      <TD><IMG SRC="mbhp/mbhp_core_8.jpg" WIDTH=280 HEIGHT=159 BORDER=0 ALT=""></TD>
61
      <TD><IMG SRC="mbhp/mbhp_core_8.jpg" WIDTH=280 HEIGHT=159 BORDER=0 ALT=""></TD>
62
      <TD CLASS=TABCOLOR2>Add also the two additional Bypass Caps on the bottom side of the PCB as close to the power inputs of the PIC as possible. They improve the power integrity. </TD>
62
      <TD CLASS=TABCOLOR2>Add also the two additional Bypass Caps on the bottom side of the PCB as close to the power inputs of the PIC as possible. They improve the power integrity. </TD>
63
    </TR>
63
    </TR>