Subversion Repositories svn.mios

Rev

Rev 365 | Show entire file | Regard whitespace | Details | Blame | Last modification | View Log | RSS feed

Rev 365 Rev 1198
Line 1... Line 1...
1
; $Id: setup_midio128.asm 365 2008-06-27 20:30:16Z tk $
1
; $Id: setup_midio128.asm 1198 2015-09-13 19:19:34Z tk $
2
    LIST R=DEC
2
    LIST R=DEC
3
;
3
;
4
; Default Setup File for MIDIO128
4
; Default Setup File for MIDIO128
5
;
5
;
6
; here you can change the default device ID
6
; here you can change the default device ID
Line 44... Line 44...
44
; If 1: Outputs are low active, reset value after poweron is "1"
44
; If 1: Outputs are low active, reset value after poweron is "1"
45
#define DEFAULT_INVERSE_DOUT    0
45
#define DEFAULT_INVERSE_DOUT    0
46
;
46
;
47
; Default value of touch sensor sensitivity
47
; Default value of touch sensor sensitivity
48
#define DEFAULT_TS_SENSITIVITY  0x03
48
#define DEFAULT_TS_SENSITIVITY  0x03
-
 
49
;
-
 
50
; Enable AIN option?
-
 
51
; Up to 64 pots can be connected to J5, unusued analog inputs have to be clamped to ground!
-
 
52
; The sent MIDI message is not configurable here, please customize in src/main.inc 
-
 
53
; (USER_AIN_NotifyChange function) instead
-
 
54
; By default, it will send CC#16, 17, 18, ... over channel #1
-
 
55
; The parameter also specifies the number of pots
-
 
56
;    0: AIN disabled
-
 
57
;    1: 1 pot directly connected to J5.A0, remaining inputs don't need to be clamped
-
 
58
;    2: 2 pots directly connected to J5.A0 and J5.A1, remaining inputs don't need to be clamped
-
 
59
;   ...
-
 
60
;    8: 8 pots directly connected to J5.A0..J5.A7
-
 
61
;    9: 9 pots, requires 4051 multiplexers (-> see MBHP_AIN page)
-
 
62
;   ...
-
 
63
;   64: 64 pots, requires 4051 multiplexers (-> see MBHP_AIN page)
-
 
64
#define DEFAULT_AIN_ENABLED     0
49
;
65
;
50
; For MIDI activity monitor: define the DOUT pins for the Rx and Tx LED
66
; For MIDI activity monitor: define the DOUT pins for the Rx and Tx LED
51
#define DEFAULT_MIDI_MONITOR_ENABLED 0  ; if 1, the Tx/Rx LEDs are enabled
67
#define DEFAULT_MIDI_MONITOR_ENABLED 0  ; if 1, the Tx/Rx LEDs are enabled
52
#define DEFAULT_MIDI_RX_LED 0x00    ; DOUT SR#1, pin D0
68
#define DEFAULT_MIDI_RX_LED 0x00    ; DOUT SR#1, pin D0
53
#define DEFAULT_MIDI_TX_LED 0x01    ; DOUT SR#1, pin D1
69
#define DEFAULT_MIDI_TX_LED 0x01    ; DOUT SR#1, pin D1