Subversion Repositories svn.mios32

Compare Revisions

Ignore whitespace Rev 1940 → Rev 1941

/trunk/apps/tutorials/005_polling_j5_pins/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o 12 Jumpers for J5A/J5B/J5C, or a cable to ground
 
===============================================================================
/trunk/apps/tutorials/027_scs/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_LPC17 (MBHP_CORE_STM32 *)
o MBHP_CORE_LPC17 (MBHP_CORE_STM32 *) or MBHP_CORE_STM32F4
o a "standard control surface"
Schematic: http://www.ucapps.de/mbhp_scs.html
 
/trunk/apps/tutorials/006_rtos_tasks/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o 12 Jumpers for J5A/J5B/J5C, or a cable to ground
 
===============================================================================
/trunk/apps/tutorials/013_mf/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o up to 16 motorfaders
o one (for up to 8 faders) or two (for up to 16 faders) MBHP_MF modules
 
/trunk/apps/tutorials/023_mutex/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a character or graphical LCD
 
===============================================================================
80,7 → 80,7
- TASK_LCD2() has to wait until the variable has been set back to 0
 
But since TASK_LCD2() is running at high priority, and accordingly blocks
all lower priority tasks, TASK_LCD1() won't be continued so long TASK_LCD2()
all lower priority tasks, TASK_LCD1() won't be continued as long as TASK_LCD2()
is waiting!
 
---
/trunk/apps/tutorials/002_parsing_midi/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/019_midi_player/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a SD Card + SD Card socket
 
===============================================================================
/trunk/apps/tutorials/015b_enc_j5_absolute/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o at least one MBHP_DINX4 module
o 1..6 rotary encoders
 
/trunk/apps/tutorials/015_enc_absolute/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o at least one MBHP_DINX4 module
o 1..64 rotary encoders
 
94,7 → 94,7
enc_config.cfg.speed_par = 2;
-------------------------------------------------------------------------------
 
You will still be able to change the virtual position precisely so long
You will still be able to change the virtual position precisely as long as
the encoder is moved slowly. Once it is turned faster, the incrementer
value increases (usually by 2..5), so that it should be possible to
send values over the complete range with a single turn (without removing
/trunk/apps/tutorials/011_ain/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o up to 12 1k pots (alternatively 4.7k or 10k)
 
===============================================================================
/trunk/apps/tutorials/010_din/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o up to 4 DINX4 modules
o up to 128 buttons
 
/trunk/apps/tutorials/018_arpeggiator/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/026_dpot/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
Optional hardware:
o 2x Microchip MCP42XXX digital potentiometers with SPI interface, for a
/trunk/apps/tutorials/012b_ainser_muxed/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a MBHP_AINSER64 module
o up to 64 1k pots (alternatively 4.7k or 10k)
 
/trunk/apps/tutorials/029_keyboard_velocity/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o 1 DIN SR
o 2 DOUT SRs
 
/trunk/apps/tutorials/008_j5_outputs/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o 12 LEDs
o 12 220 Ohm resistors
o 3 2x5 pin sockets
/trunk/apps/tutorials/004_sending_midi/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/022_glcd_touchpanel/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a DOGM128 based graphical LCD
o a resistive touchpanel "EA TOUCH128", which is available as accessory to DOGM128
 
/trunk/apps/tutorials/017_sequencer/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/020_lcd/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a character or graphical LCD
 
===============================================================================
/trunk/apps/tutorials/014b_enc_j5_relative/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o at least one MBHP_DINX4 module
o 1..6 rotary encoders
 
/trunk/apps/tutorials/014_enc_relative/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o at least one MBHP_DINX4 module
o 1..64 rotary encoders
 
/trunk/apps/tutorials/001_forwarding_midi/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/025_sysex_and_eeprom/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
Optional hardware:
o LCD and DIN to "fire" a dump
/trunk/apps/tutorials/012_ain_muxed/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o one or two MBHP_AIN modules
o up to 64 1k pots (alternatively 4.7k or 10k)
 
/trunk/apps/tutorials/021_glcd/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o a graphical LCD
 
===============================================================================
/trunk/apps/tutorials/016_aout/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
(STM32: DAC voltages are output at pin RA4 (J16:RC1) and RA5 (J16:SC)
 
Optional hardware:
157,7 → 157,7
by opening the MIOS Terminal. Whenever a Note is received, the new content
of the Notestack will be send to the terminal as plain text messages.
 
The Board LED should turn on so long a key is pressed on your keyboard.
The Board LED should turn on as long as a key is pressed on your keyboard.
It should turn off once no key is played anymore.
 
 
/trunk/apps/tutorials/003_debug_messages/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/007_mios32_timer/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
 
===============================================================================
 
/trunk/apps/tutorials/009_dout/README.txt
13,7 → 13,7
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o MBHP_CORE_STM32 or MBHP_CORE_LPC17 or MBHP_CORE_STM32F4 or similar
o up to 4 DOUTX4 modules
o up to 128 LEDs
 
/trunk/apps/tutorials/024_i2s_synth/README.txt
13,8 → 13,9
===============================================================================
 
Required hardware:
o MBHP_CORE_STM32 or MBHP_CORE_LPC17
o a I2S compatible audio DAC (like TDA1543 or PCM1725U)
o MBHP_CORE_STM32 and a I2S compatible audio DAC (like TDA1543 or PCM1725U)
o MBHP_CORE_LPC17 and a I2S compatible audio DAC (like TDA1543 or PCM1725U)
o MBHP_CORE_STM32F4 (has an on-board DAC)
 
Optional:
o a 2x16 LCD
/trunk/apps/tutorials/028_osc/README.txt
13,9 → 13,9
===============================================================================
 
Required hardware:
o MBHP_CORE_LPC17 (MBHP_CORE_STM32 *)
o MBHP_CORE_LPC17 (MBHP_CORE_STM32 or MBHP_CORE_STM32F4 *)
 
(*) MBHP_CORE_STM32 requires an ENC28J60 based MBHP_ETH module in addition
(*) MBHP_CORE_STM32(F4) requires an ENC28J60 based MBHP_ETH module in addition
 
===============================================================================