Subversion Repositories svn.mios32

Compare Revisions

Ignore whitespace Rev 2530 → Rev 2529

/trunk/apps/sequencers/midibox_seq_v4/hwcfg/antilog/MBSEQ_HW.V4
File deleted
/trunk/apps/sequencers/midibox_seq_v4/hwcfg/wilba_tpd/MBSEQ_HW.V4
239,10 → 239,6
# have been added to the cathode lines
BLM8X8_DOUT_CATHODES_INV_MASK 0x00
 
# set an inversion mask for the DOUT shift registers if source drivers (transistors)
# have been added to the anode lines
BLM8X8_DOUT_ANODES_INV_MASK 0x00
 
# to which shift register are the LED anode lines connected?
# Allowed values: 0 to disable, 1..16 to assign shift register
BLM8X8_DOUT_LED_SR 2
249,7 → 245,6
 
# 0: no mapping of 8x8 LEDs
# 1: enable GP LED -> 8x8 matrix mapping for Wilba's MB-SEQ PCB
# 2: enable GP LED -> matrix mapping for Antilog PCB
BLM8X8_DOUT_GP_MAPPING 1
 
# 8x8 matrix for misc. button functions
/trunk/apps/sequencers/midibox_seq_v4/hwcfg/standard_v4/MBSEQ_HW.V4
238,10 → 238,6
# have been added to the cathode lines
BLM8X8_DOUT_CATHODES_INV_MASK 0x00
 
# set an inversion mask for the DOUT shift registers if source drivers (transistors)
# have been added to the anode lines
BLM8X8_DOUT_ANODES_INV_MASK 0x00
 
# to which shift register are the LED anode lines connected?
# Allowed values: 0 to disable, 1..16 to assign shift register
BLM8X8_DOUT_LED_SR 2
248,7 → 244,6
 
# 0: no mapping of 8x8 LEDs
# 1: enable GP LED -> 8x8 matrix mapping for Wilba's MB-SEQ PCB
# 2: enable GP LED -> matrix mapping for Antilog PCB
BLM8X8_DOUT_GP_MAPPING 1
 
# 8x8 matrix for misc. button functions
/trunk/apps/sequencers/midibox_seq_v4/hwcfg/tk/MBSEQ_HW.V4
238,10 → 238,6
# have been added to the cathode lines
BLM8X8_DOUT_CATHODES_INV_MASK 0x00
 
# set an inversion mask for the DOUT shift registers if source drivers (transistors)
# have been added to the anode lines
BLM8X8_DOUT_ANODES_INV_MASK 0x00
 
# to which shift register are the LED anode lines connected?
# Allowed values: 0 to disable, 1..16 to assign shift register
BLM8X8_DOUT_LED_SR 2
248,7 → 244,6
 
# 0: no mapping of 8x8 LEDs
# 1: enable GP LED -> 8x8 matrix mapping for Wilba's MB-SEQ PCB
# 2: enable GP LED -> matrix mapping for Antilog PCB
BLM8X8_DOUT_GP_MAPPING 1
 
# 8x8 matrix for misc. button functions
/trunk/apps/sequencers/midibox_seq_v4/hwcfg/wilba/MBSEQ_HW.V4
238,10 → 238,6
# have been added to the cathode lines
BLM8X8_DOUT_CATHODES_INV_MASK 0x00
 
# set an inversion mask for the DOUT shift registers if source drivers (transistors)
# have been added to the anode lines
BLM8X8_DOUT_ANODES_INV_MASK 0x00
 
# to which shift register are the LED anode lines connected?
# Allowed values: 0 to disable, 1..16 to assign shift register
BLM8X8_DOUT_LED_SR 2
248,7 → 244,6
 
# 0: no mapping of 8x8 LEDs
# 1: enable GP LED -> 8x8 matrix mapping for Wilba's MB-SEQ PCB
# 2: enable GP LED -> matrix mapping for Antilog PCB
BLM8X8_DOUT_GP_MAPPING 1
 
# 8x8 matrix for misc. button functions