| 47,6 → 47,22 |
|---|
| ; Default value of touch sensor sensitivity |
| #define DEFAULT_TS_SENSITIVITY 0x03 |
| ; |
| ; Enable AIN option? |
| ; Up to 64 pots can be connected to J5, unusued analog inputs have to be clamped to ground! |
| ; The sent MIDI message is not configurable here, please customize in src/main.inc |
| ; (USER_AIN_NotifyChange function) instead |
| ; By default, it will send CC#16, 17, 18, ... over channel #1 |
| ; The parameter also specifies the number of pots |
| ; 0: AIN disabled |
| ; 1: 1 pot directly connected to J5.A0, remaining inputs don't need to be clamped |
| ; 2: 2 pots directly connected to J5.A0 and J5.A1, remaining inputs don't need to be clamped |
| ; ... |
| ; 8: 8 pots directly connected to J5.A0..J5.A7 |
| ; 9: 9 pots, requires 4051 multiplexers (-> see MBHP_AIN page) |
| ; ... |
| ; 64: 64 pots, requires 4051 multiplexers (-> see MBHP_AIN page) |
| #define DEFAULT_AIN_ENABLED 0 |
| ; |
| ; For MIDI activity monitor: define the DOUT pins for the Rx and Tx LED |
| #define DEFAULT_MIDI_MONITOR_ENABLED 0 ; if 1, the Tx/Rx LEDs are enabled |
| #define DEFAULT_MIDI_RX_LED 0x00 ; DOUT SR#1, pin D0 |