Subversion Repositories svn.mios32

Rev

Rev 2088 | Rev 2105 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
524 tk 1
##################################################
2
# Setup File for Standard Frontpanel
3
# $Id: MBSEQ_HW.V4 2098 2014-12-07 19:25:03Z tk $
4
##################################################
5
 
6
 
7
##################################################
741 tk 8
# MIDI Remote Keyboard Function
9
##################################################
10
 
11
# The note number which activates the remote function
742 tk 12
# 96 = C-7 (by some MIDI monitors displayed as C-8)
741 tk 13
# 0 disables the remote keyboard function
14
MIDI_REMOTE_KEY 96
15
 
16
# The CC number which activates the remote function
17
# (e.g. to control it with a footswitch)
18
# Allowed numbers: 1-127 for CC#1..CC#127
19
# 0 disables the function (default)
20
MIDI_REMOTE_CC 0
21
 
22
 
23
##################################################
1713 tk 24
# Track Selection CC
25
# Allows to synchronize track selections with a DAW
26
##################################################
27
 
28
# select the mode:
29
# 0: no CC sent on track changes
30
# 1: send a single CC which contains the track number as value
31
# 2: send CC..CC+15 depending on track number with value 127
32
TRACK_CC_MODE 0
33
 
34
# over which port should the CC be sent?
35
# specifiy: USB1..USB4, OUT1..OUT4, IIC1..IIC4, AOUT (haha ;-), OSC1..OSC4
36
TRACK_CC_PORT USB1
37
 
38
# over which MIDI channel should the CC be sent (1..16)?
39
TRACK_CC_CHANNEL 1
40
 
1714 tk 41
# which CC number should be sent (if TRACK_CC_MODE == 2: the first CC)
1713 tk 42
TRACK_CC_NUMBER 100
43
 
44
 
45
##################################################
1025 tk 46
# Running status optimisation
47
# Enabled by default, should be disabled if a MIDI
48
# device connected to a MIDI port doesn't fully
49
# comply to the MIDI specification.
50
# Expects two parameters: port number and 0/1 to
51
# disable/enable the optimisation.
52
##################################################
53
 
1346 tk 54
# OUT1 (MIDI1 port of MBHP_CORE_STM32 and MBHP_CORE_LPC17 module)
1713 tk 55
RS_OPTIMISATION OUT1 1
1025 tk 56
 
1346 tk 57
# OUT2 (MIDI2 port of MBHP_CORE_STM32 and MBHP_CORE_LPC17 module)
1713 tk 58
RS_OPTIMISATION OUT2 1
1025 tk 59
 
1346 tk 60
# OUT3 (MIDI3 port of MBHP_CORE_STM32 and MBHP_CORE_LPC17 module)
1713 tk 61
RS_OPTIMISATION OUT3 1
1025 tk 62
 
1346 tk 63
# OUT4 (MIDI4 port of MBHP_CORE_LPC17 module)
1713 tk 64
RS_OPTIMISATION OUT4 1
1346 tk 65
 
66
 
1025 tk 67
##################################################
2039 tk 68
# Menu Shortcuts allow a quick selection of menu pages.
69
# Will be displayed when the "MENU" button is pressed
70
# Syntax: MENU_SHORTCUT <gp-button-number> <page-name>
71
#
72
# <gp-button-number> in the range of 1..16
73
# <page-name>: one of these names:
74
#
75
#   - MENU         (Page Menu)
76
#   - FXSEL        (Fx Selection)
77
#   - STEPSEL      (Step Selection)
78
#   - TRGSEL       (Trigger Selection)
79
#   - PARSEL       (Param. Selection)
80
#   - TRACKSEL     (Track Selection)
81
#   - BPM_PRESETS  (BPM Presets)
82
#   - EDIT         (Edit)
83
#   - MUTE         (Mute Tracks)
84
#   - MUTE_PORTS   (Mute Ports)
85
#   - PATTERNS     (Patterns)
86
#   - SONG         (Song)
87
#   - MIXER        (Mixer)
88
#   - EVENTS       (Track Events)
89
#   - MODE         (Track Mode)
90
#   - DIRECTION    (Track Direction)
91
#   - DIVIDER      (Track ClockDivider)
92
#   - LENGTH       (Track Length)
93
#   - TRANSPOSE    (Track Transpose)
94
#   - GROOVE       (Track Groove)
95
#   - TRG_ASSIGN   (Track Triggers)
96
#   - MORPH        (Track Morphing)
97
#   - RANDOM       (Random Generator)
98
#   - EUCLID       (Track Euclid Generator)
99
#   - RECORD       (Record)
100
#   - MANUAL       (Manual Trigger)
101
#   - FX_ECHO      (Track Fx: Echo)
102
#   - FX_HUMANIZER (Track Fx: Humanize)
103
#   - FX_LIMIT     (Track Fx: Limit)
104
#   - FX_LFO       (Track Fx: LFO)
105
#   - FX_DUPLICATE (Track Fx: Duplicate)
106
#   - FX_LOOP      (Global Fx: Loop)
107
#   - FX_SCALE     (Global Fx: Scale)
108
#   - UTIL         (Utilities)
109
#   - BPM          (BPM Selection)
110
#   - OPTIONS      (Options)
111
#   - SAVE         (Save Pattern)
112
#   - METRONOME    (Metronome)
113
#   - MIDI         (MIDI Configuration)
114
#   - MIDIMON      (MIDI Monitor)
115
#   - SYSEX        (SysEx)
116
#   - CVCFG        (CV Configuration)
117
#   - DISK         (Disk (SD Card))
118
#   - ETH_OSC      (Ethernet & OSC)
119
#   - LIVE         (Live Play)
120
#   - REMIX        (Pattern Remix)
121
#   - BOOKMARKS    (Bookmarks)
122
#   - ABOUT        (About this MIDIbox)
123
#
124
##################################################
125
 
126
MENU_SHORTCUT  1 MIXER
127
MENU_SHORTCUT  2 EVENTS
128
MENU_SHORTCUT  3 MODE
129
MENU_SHORTCUT  4 DIRECTION
130
MENU_SHORTCUT  5 DIVIDER
131
MENU_SHORTCUT  6 LENGTH
132
MENU_SHORTCUT  7 TRANSPOSE
133
MENU_SHORTCUT  8 GROOVE
134
MENU_SHORTCUT  9 TRG_ASSIGN
135
MENU_SHORTCUT 10 FXSEL
136
MENU_SHORTCUT 11 MANUAL
137
MENU_SHORTCUT 12 MORPH
138
MENU_SHORTCUT 13 BPM
139
MENU_SHORTCUT 14 SAVE
140
MENU_SHORTCUT 15 MIDI
141
MENU_SHORTCUT 16 SYSEX
142
 
143
 
144
##################################################
524 tk 145
# Shift Register Setup
146
##################################################
147
 
1864 tk 148
# maximum number of connected shift registers in a DIN or DOUT chain (1..23)
149
SRIO_NUM_SR    23
150
 
524 tk 151
# number of first and second DOUT shift register used for GP LEDs
152
GP_DOUT_L_SR    3
153
GP_DOUT_R_SR    4
154
 
155
# DOUTs for Dual Color option:
156
GP_DOUT_L2_SR  0
157
GP_DOUT_R2_SR  0
158
 
1146 tk 159
# OPTIONAL: individual track LEDs can optionally be assigned to SRs:
160
# they correspond with the BUTTON_DIRECT_TRACK* buttons
161
TRACKS_DOUT_L_SR 0
162
TRACKS_DOUT_R_SR 0
163
 
1126 tk 164
# sets the debounce delay for low-quality buttons in mS
165
# use low values for high quality buttons - this ensures best latency.
166
# use higher values for lower quality buttons.
167
# Recommended values:
168
#   - 0   for high quality buttons (we used it many months w/o complaints)
169
#   - 5  is the default
170
#   - 20 for low-quality buttons
171
DEBOUNCE_DELAY 5
524 tk 172
 
1126 tk 173
 
524 tk 174
##################################################
175
# Optional BLM Matrix
176
##################################################
177
 
178
# set this value to 1 if each track has its own set of 16 LEDs to display unmuted steps and current sequencer position
179
# or if you are using a button/led matrix for misc. button/LED functions
180
BLM_ENABLED     1
181
 
182
# define the shift registers to which the anodes of these LEDs are connected
183
# Note: they can be equal to GP_DOUT_[LH]_SR, this saves two shift registers, but doesn't allow a separate view of UI selections
184
BLM_DOUT_L1_SR	6
185
BLM_DOUT_R1_SR	9
186
 
187
# define the shift register to which the cathodes of these LEDs are connected
188
# Note that the whole shift register (8 pins) will be allocated! The 4 select lines are duplicated (4 for LED matrix, 4 for button matrix)
189
# The second DOUT_CATHODES2 selection is optional if LEDs with high power consumption are used - set this to 0 if not used
190
BLM_DOUT_CATHODES_SR1  5
191
BLM_DOUT_CATHODES_SR2  8
192
 
193
# set an inversion mask for the DOUT shift registers if sink drivers (transistors)
194
# have been added to the cathode lines
195
# Settings: 0x00 - no sink drivers
196
#           0xf0 - sink drivers connected to D0..D3
197
#           0x0f - sink drivers connected to D7..D4
198
BLM_DOUT_CATHODES_INV_MASK 0x00
199
 
200
# 0: no DUO colour LEDs are connected to the LED matrix (position marker inverts step LED)
201
# 1: DUO colour LEDs are connected to the LED matrix, second LED displays position marker
202
# 2: Like option 1, but the first LED is turned off when the position marker activates the second LED
203
BLM_DOUT_DUOCOLOUR  1
204
 
205
# define the shift registers to which the anodes of the "second colour" (red) LEDs are connected
206
BLM_DOUT_L2_SR  7
207
BLM_DOUT_R2_SR  10
208
 
209
# set this to 1 if a button matrix is connected
210
BLM_BUTTONS_ENABLED 1
211
 
212
# set this to 1 if these buttons should only control the "step triggers" (gate, and other assigned triggers) - and no UI functions
213
BLM_BUTTONS_NO_UI   1
214
 
1675 tk 215
# optional (only useful in conjunction with the BLM):
216
# if 0: the GP buttons/LEDs are working as usual
217
# if 1: the GP buttons/LEDs always select the page items like if the MENU button is pressed,
218
#       the GP LEDs show the selected page (if matching with any of these items)
219
BLM_GP_ALWAYS_SELECT_MENU_PAGE 0
220
 
524 tk 221
# define the DIN shift registers to which the button matrix is connected
222
BLM_DIN_L_SR  11
223
BLM_DIN_R_SR  12
224
 
225
 
784 tk 226
##################################################
1336 tk 227
# Additional 8x8 BLM as used for Wilba's Frontpanel
524 tk 228
##################################################
229
 
230
# set to 1 to enable 8x8 BLM driver
231
BLM8X8_ENABLED  0
232
 
233
# to which shift register are the select lines connected?
234
# Allowed values: 0 to disable, 1..16 to assign shift register
235
BLM8X8_DOUT_CATHODES_SR  1
236
 
237
# set an inversion mask for the DOUT shift registers if sink drivers (transistors)
238
# have been added to the cathode lines
239
BLM8X8_DOUT_CATHODES_INV_MASK 0x00
240
 
241
# to which shift register are the LED anode lines connected?
242
# Allowed values: 0 to disable, 1..16 to assign shift register
2088 tk 243
BLM8X8_DOUT_LED_SR      2
524 tk 244
 
245
# 0: no mapping of 8x8 LEDs
246
# 1: enable GP LED -> 8x8 matrix mapping for Wilba's MB-SEQ PCB
247
BLM8X8_DOUT_GP_MAPPING  1
248
 
249
# 8x8 matrix for misc. button functions
250
BLM8X8_DIN_SR  2
251
 
252
 
253
##################################################
1336 tk 254
# Optional BPM digits
255
##################################################
256
 
257
# set to 1 or 2 to enable the 3 optional BPM digits
258
# 0: BPM digits disabled
259
# 1: BPM digits with common cathode
260
# 2: BPM digits with common anode
261
BPM_DIGITS_ENABLED 0
262
 
263
# define the DOUT shift register to which the segments are connected (0=disabled)
264
BPM_DIGITS_SEGMENTS_SR 0
265
 
266
# define the DOUT SR and pin to which the common pins are connected
1341 tk 267
# we are counting from right to left
268
# Example: 140.5 BPM: (COMMON1 = 5, COMMON2=0., COMMON3=4, COMMON4=1)
1336 tk 269
#                       SR  Pin
270
BPM_DIGITS_COMMON1_PIN   0   0
271
BPM_DIGITS_COMMON2_PIN   0   0
272
BPM_DIGITS_COMMON3_PIN   0   0
1341 tk 273
BPM_DIGITS_COMMON4_PIN   0   0
1336 tk 274
 
275
 
276
##################################################
1341 tk 277
# Optional Step digits
278
##################################################
279
 
280
# set to 1 or 2 to enable the 3 optional STEP digits
281
# 0: STEP digits disabled
282
# 1: STEP digits with common cathode
283
# 2: STEP digits with common anode
284
STEP_DIGITS_ENABLED 0
285
 
286
# define the DOUT shift register to which the segments are connected (0=disabled)
287
STEP_DIGITS_SEGMENTS_SR 0
288
 
289
# define the DOUT SR and pin to which the common pins are connected
290
# we are counting from right to left
291
# Example: Step 123: (COMMON1 = 3, COMMON2=2, COMMON3=1)
292
#                       SR  Pin
293
STEP_DIGITS_COMMON1_PIN   0   0
294
STEP_DIGITS_COMMON2_PIN   0   0
295
STEP_DIGITS_COMMON3_PIN   0   0
296
 
297
 
298
##################################################
1864 tk 299
# Optional LED Track Position Display
300
# See also http://www.midibox.org/dokuwiki/doku.php?id=tpd_pcb
1345 tk 301
##################################################
302
 
303
# set to 1 or 2 to enable the relative track position display
304
# 0: TPD disabled
1864 tk 305
# 1: TPD enabled - columns are cathodes, rows are anodes
306
# 2: TPD enabled - columns are anodes, rows are cathodes
1345 tk 307
TPD_ENABLED 0
308
 
309
# define the DOUT shift register to which the columns are connected (0=disabled)
1864 tk 310
TPD_COLUMNS_SR_L 0
1345 tk 311
 
1864 tk 312
# for a 16x16 TPD: define the SR to which the right columns are connected (0=disabled, use only 8x8 TPD)
313
TPD_COLUMNS_SR_R 0
1345 tk 314
 
1864 tk 315
# define the DOUT shift register to which the green LED rows are connected (0=disabled)
316
TPD_ROWS_SR_GREEN_L 0
1345 tk 317
 
1864 tk 318
# define the DOUT shift register to which the right green LED rows are connected (0=disabled, use only 8x8 TPD)
319
TPD_ROWS_SR_GREEN_R 0
320
 
321
# define the DOUT shift register to which the red LED rows are connected (0=disabled)
322
TPD_ROWS_SR_RED_L 0
323
 
324
# define the DOUT shift register to which the right red LED rows are connected (0=disabled, use only 8x8 TPD)
325
TPD_ROWS_SR_RED_R 0
326
 
327
 
1345 tk 328
##################################################
524 tk 329
# CV and Gate/Trigger/Sync Setup
330
##################################################
331
 
1083 tk 332
# AOUT interface now selected in CV Configuration Menu and stored in MBSEQ_CV.V4 file
333
# please scroll through the menu to find this page!
524 tk 334
 
2098 tk 335
# the 8 CV gates can be assigned to a shift register (0=off, 1-32: number of shift register):
2088 tk 336
# - 1st CV Gate available at DOUT SR output D7
337
# - 2nd CV Gate available at DOUT SR output D6
338
# - 3rd CV Gate available at DOUT SR output D5
339
# - ...
340
# - 8th CV Gate available at DOUT SR output D0
341
CV_GATE_SR1   0
342
 
2098 tk 343
# and DIN Clock Outputs can be assigned to a shift register as well (0=off, 1-32: number of shift register):
344
# D7..D0 will output individual clock or start/stop signals which can be configured in the CV configuration page
2088 tk 345
CLK_SR        0
346
 
524 tk 347
# additional gate triggers are available on common digital output pins of the
348
# DOUT shift register chain - they are assigned to AOUT channel #16 (Note C-1, C#1, D-1, ...)
349
# define the shift registers which should be used here (each provides 8 gates)
350
# Note that SRs assigned to this function cannot be used as LED outputs (exclusive function)
2098 tk 351
# Allowed values: 1-32, 0 disables the function, all other values invalid and not allowed
524 tk 352
DOUT_GATE_SR1   0
353
DOUT_GATE_SR2   0
354
DOUT_GATE_SR3   0
355
DOUT_GATE_SR4   0
356
DOUT_GATE_SR5   0
357
DOUT_GATE_SR6   0
358
DOUT_GATE_SR7   0
359
DOUT_GATE_SR8   0
360
 
361
# if set to 1, the DOUT "gates" will send 1mS pulses
362
# useful for analog drums
363
DOUT_1MS_TRIGGER 0
364
 
365
# should J5A/B/C outputs be enabled (0: no, 1: yes, 2: yes, but in open drain mode)?
1311 tk 366
#  - the 6 first AOUT gates will be forwarded to J5A/B
367
#  - the remaining last 2 AOUT gates are available at J5C.A10 and J5C.A11 (LPC17: J28.WS and J28.MCLK)
368
#  - DIN sync clock will be forwarded to J5C:A0 (LPC17: J28.SDA)
369
#  - DIN sync start/stop will be forwarded to J5C:A1 (LPC17: J28.SC)
524 tk 370
#  - if open drain mode enabled (option 2), external pull-ups have to be connected to J5 pins
371
#    (advantage: pin levels can be pulled to 5V)
372
#
373
# NEVER USE THIS TOGETHER WITH ANALOG POTS - IT WILL CAUSE A SHORT CIRCUIT!
374
J5_ENABLED 1
375
 
376
 
377
##################################################
378
# LED assignments to DOUT pins
379
# SR = 0: LED disabled
1864 tk 380
# SR = 1..23:  directly forwarded to DOUT pin
381
# SR = M1..M8: forwarded to a 8x8 LED matrix
524 tk 382
##################################################
383
 
384
#           SR  Pin
385
LED_TRACK1   1   0
386
LED_TRACK2   1   1
387
LED_TRACK3   1   2
388
LED_TRACK4   1   3
389
 
390
#                SR  Pin
391
LED_PAR_LAYER_A   1   4
392
LED_PAR_LAYER_B   1   5
393
LED_PAR_LAYER_C   1   6
394
 
395
#         SR  Pin
396
LED_BEAT   1   7
397
 
1336 tk 398
#                    SR  Pin
399
LED_MIDI_IN_COMBINED  0   0
400
LED_MIDI_OUT_COMBINED 0   0
401
 
524 tk 402
#           SR  Pin
403
LED_EDIT     2   0
404
LED_MUTE     2   1
405
LED_PATTERN  2   2
406
LED_SONG     2   3
407
 
408
#           SR  Pin
409
LED_SOLO     2   4
410
LED_FAST     2   5
1121 tk 411
LED_FAST2    0   0
524 tk 412
LED_ALL      2   6
413
 
414
#           SR  Pin
415
LED_GROUP1  11   0
416
LED_GROUP2  11   2
417
LED_GROUP3  11   4
418
LED_GROUP4  11   6
419
 
420
#                SR  Pin
421
LED_TRG_LAYER_A   0   0
422
LED_TRG_LAYER_B   0   1
423
LED_TRG_LAYER_C   0   2
424
 
425
#          SR  Pin
591 tk 426
LED_EXIT    0   0
427
LED_SELECT  0   0
524 tk 428
LED_PLAY    0   0
429
LED_STOP    0   0
430
LED_PAUSE   0   0
431
LED_REW     0   0
432
LED_FWD     0   0
596 tk 433
LED_LOOP    0   0
951 tk 434
LED_FOLLOW  0   0
524 tk 435
 
436
#              SR  Pin
437
LED_MENU        0   0
1203 tk 438
LED_BOOKMARK    0   0
524 tk 439
LED_SCRUB       0   0
440
LED_METRONOME   0   0
630 tk 441
LED_RECORD      0   0
1219 tk 442
LED_LIVE        0   0
524 tk 443
LED_UTILITY     0   0
444
LED_COPY        0   0
445
LED_PASTE       0   0
446
LED_CLEAR       0   0
1014 tk 447
LED_UNDO        0   0
524 tk 448
 
449
#                  SR  Pin
450
LED_STEP_VIEW       0   0
451
LED_PAR_LAYER_SEL   0   0
452
LED_TRG_LAYER_SEL   0   0
453
LED_TRACK_SEL       0   0
454
 
596 tk 455
#                  SR  Pin
524 tk 456
LED_TAP_TEMPO       0   0
457
LED_TEMPO_PRESET    0   0
458
LED_EXT_RESTART     0   0
459
 
460
#         SR  Pin
461
LED_DOWN   0   0
462
LED_UP     0   0
463
 
743 tk 464
#             SR  Pin
465
LED_MIXER      0   0
524 tk 466
 
1119 tk 467
#                   SR  Pin
468
LED_TRACK_MODE       0   0
469
LED_TRACK_GROOVE     0   0
470
LED_TRACK_LENGTH     0   0
471
LED_TRACK_DIRECTION  0   0
472
LED_TRACK_MORPH      0   0
473
LED_TRACK_TRANSPOSE  0   0
524 tk 474
 
1811 tk 475
#                                SR  Pin
476
LED_MUTE_ALL_TRACKS               0   0
477
LED_MUTE_TRACK_LAYERS             0   0
478
LED_MUTE_ALL_TRACKS_AND_LAYERS    0   0
479
LED_UNMUTE_ALL_TRACKS             0   0
480
LED_UNMUTE_TRACK_LAYERS           0   0
481
LED_UNMUTE_ALL_TRACKS_AND_LAYERS  0   0
1119 tk 482
 
1811 tk 483
 
524 tk 484
##################################################
485
# Button assignments to DIN pins
486
# SR = 0: Button disabled
1864 tk 487
# SR = 1..23:  directly triggered from DIN pin
488
# SR = M1..M8: triggered from a 8x8 button matrix
524 tk 489
##################################################
490
 
491
#            SR  Pin
492
BUTTON_DOWN   1   0
493
BUTTON_UP     1   1
494
BUTTON_LEFT   0   0
495
BUTTON_RIGHT  0   0
496
 
497
#                SR  Pin
498
BUTTON_SCRUB      1   2
499
BUTTON_METRONOME  1   3
630 tk 500
BUTTON_RECORD     0   0
1219 tk 501
BUTTON_LIVE       0   0
524 tk 502
 
503
#             SR  Pin
504
BUTTON_STOP    1   4
505
BUTTON_PAUSE   1   5
506
BUTTON_PLAY    1   6
507
BUTTON_REW     1   7
508
BUTTON_FWD     2   0
596 tk 509
BUTTON_LOOP    0   0
951 tk 510
BUTTON_FOLLOW  0   0
524 tk 511
 
512
#              SR  Pin
513
BUTTON_MENU     2   5
1203 tk 514
BUTTON_BOOKMARK 0   0
524 tk 515
BUTTON_SELECT   2   6
516
BUTTON_EXIT     2   7
517
 
518
#              SR  Pin
519
BUTTON_TRACK1   3   0
520
BUTTON_TRACK2   3   1
521
BUTTON_TRACK3   3   2
522
BUTTON_TRACK4   3   3
523
 
524
#                  SR  Pin
525
BUTTON_PAR_LAYER_A  3   4
526
BUTTON_PAR_LAYER_B  3   5
527
BUTTON_PAR_LAYER_C  3   6
528
 
529
#               SR  Pin
530
BUTTON_EDIT      4   0
531
BUTTON_MUTE      4   1
532
BUTTON_PATTERN   4   2
533
BUTTON_SONG      4   3
534
 
535
#            SR  Pin
536
BUTTON_SOLO   4   4
537
BUTTON_FAST   4   5
1121 tk 538
BUTTON_FAST2  0   0
524 tk 539
BUTTON_ALL    4   6
540
 
541
#            SR  Pin
542
BUTTON_GP1    7   0
543
BUTTON_GP2    7   1
544
BUTTON_GP3    7   2
545
BUTTON_GP4    7   3
546
BUTTON_GP5    7   4
547
BUTTON_GP6    7   5
548
BUTTON_GP7    7   6
549
BUTTON_GP8    7   7
550
BUTTON_GP9   10   0
551
BUTTON_GP10  10   1
552
BUTTON_GP11  10   2
553
BUTTON_GP12  10   3
554
BUTTON_GP13  10   4
555
BUTTON_GP14  10   5
556
BUTTON_GP15  10   6
557
BUTTON_GP16  10   7
558
 
559
#              SR  Pin
560
BUTTON_GROUP1  13   0
561
BUTTON_GROUP2  13   1
562
BUTTON_GROUP3  13   2
563
BUTTON_GROUP4  13   3
564
 
1146 tk 565
# alternative (individual) track selection buttons
566
# LEDs have to be assigned to TRACKS_DOUT_L_SR and TRACKS_DOUT_R_SR
567
#                     SR  Pin
568
BUTTON_DIRECT_TRACK1   0   0
569
BUTTON_DIRECT_TRACK2   0   0
570
BUTTON_DIRECT_TRACK3   0   0
571
BUTTON_DIRECT_TRACK4   0   0
572
BUTTON_DIRECT_TRACK5   0   0
573
BUTTON_DIRECT_TRACK6   0   0
574
BUTTON_DIRECT_TRACK7   0   0
575
BUTTON_DIRECT_TRACK8   0   0
576
BUTTON_DIRECT_TRACK9   0   0
577
BUTTON_DIRECT_TRACK10  0   0
578
BUTTON_DIRECT_TRACK11  0   0
579
BUTTON_DIRECT_TRACK12  0   0
580
BUTTON_DIRECT_TRACK13  0   0
581
BUTTON_DIRECT_TRACK14  0   0
582
BUTTON_DIRECT_TRACK15  0   0
583
BUTTON_DIRECT_TRACK16  0   0
584
 
524 tk 585
#                   SR  Pin
586
BUTTON_TRG_LAYER_A  13   4
587
BUTTON_TRG_LAYER_B  13   5
588
BUTTON_TRG_LAYER_C  13   6
589
 
590
 
591
# Following button functions are usually assigned to Fx
592
# buttons, or to dedicated (labeled) buttons
593
# In the standard frontpanel layout:
594
# F1 is located at SR 2 Pin 1
595
# F2 is located at SR 2 Pin 2
596
# F3 is located at SR 2 Pin 3
597
# F4 is located at SR 2 Pin 4
598
 
599
#                   SR  Pin
600
BUTTON_UTILITY       2   1
601
BUTTON_STEP_VIEW     2   2
602
BUTTON_TRG_LAYER_SEL 2   3
603
BUTTON_TRACK_SEL     2   4
604
 
605
BUTTON_PAR_LAYER_SEL  0   0
606
 
607
#                   SR  Pin
608
BUTTON_TAP_TEMPO     0   0
609
BUTTON_TEMPO_PRESET  0   0
610
BUTTON_EXT_RESTART   0   0
611
 
612
#               SR  Pin
613
BUTTON_COPY      0   0
614
BUTTON_PASTE     0   0
615
BUTTON_CLEAR     0   0
1014 tk 616
BUTTON_UNDO      0   0
524 tk 617
 
544 tk 618
#                SR  Pin
619
BUTTON_MIXER      0   0
524 tk 620
 
1787 tk 621
#                SR  Pin
622
BUTTON_SAVE       0   0
623
BUTTON_SAVE_ALL   0   0
624
 
1461 tk 625
#                   SR  Pin
626
BUTTON_PATTERN_RMX   0   0
1349 tk 627
 
628
#                 SR  Pin
629
BUTTON_FOOTSWITCH  0   0
630
 
631
 
1119 tk 632
#                      SR  Pin
633
BUTTON_TRACK_MODE       0   0
634
BUTTON_TRACK_GROOVE     0   0
635
BUTTON_TRACK_LENGTH     0   0
636
BUTTON_TRACK_DIRECTION  0   0
637
BUTTON_TRACK_MORPH      0   0
638
BUTTON_TRACK_TRANSPOSE  0   0
544 tk 639
 
1119 tk 640
 
1811 tk 641
#                                   SR  Pin
642
BUTTON_MUTE_ALL_TRACKS               0   0
643
BUTTON_MUTE_TRACK_LAYERS             0   0
644
BUTTON_MUTE_ALL_TRACKS_AND_LAYERS    0   0
645
BUTTON_UNMUTE_ALL_TRACKS             0   0
646
BUTTON_UNMUTE_TRACK_LAYERS           0   0
647
BUTTON_UNMUTE_ALL_TRACKS_AND_LAYERS  0   0
648
 
649
 
1205 tk 650
# alternative (individual) bookmark buttons
651
# no LEDs available!
652
#                        SR  Pin
653
BUTTON_DIRECT_BOOKMARK1   0   0
654
BUTTON_DIRECT_BOOKMARK2   0   0
655
BUTTON_DIRECT_BOOKMARK3   0   0
656
BUTTON_DIRECT_BOOKMARK4   0   0
657
BUTTON_DIRECT_BOOKMARK5   0   0
658
BUTTON_DIRECT_BOOKMARK6   0   0
659
BUTTON_DIRECT_BOOKMARK7   0   0
660
BUTTON_DIRECT_BOOKMARK8   0   0
661
BUTTON_DIRECT_BOOKMARK9   0   0
662
BUTTON_DIRECT_BOOKMARK10  0   0
663
BUTTON_DIRECT_BOOKMARK11  0   0
664
BUTTON_DIRECT_BOOKMARK12  0   0
665
BUTTON_DIRECT_BOOKMARK13  0   0
666
BUTTON_DIRECT_BOOKMARK14  0   0
667
BUTTON_DIRECT_BOOKMARK15  0   0
668
BUTTON_DIRECT_BOOKMARK16  0   0
669
 
670
 
524 tk 671
##################################################
672
# Button behaviour
1121 tk 673
# 0: active mode as long as button pressed
524 tk 674
# 1: pressing button toggles the mode
675
##################################################
676
 
677
BUTTON_BEH_FAST         1
1121 tk 678
BUTTON_BEH_FAST2        0
524 tk 679
BUTTON_BEH_ALL          1
680
BUTTON_BEH_SOLO         1
681
BUTTON_BEH_METRONOME    1
596 tk 682
BUTTON_BEH_LOOP         1
951 tk 683
BUTTON_BEH_FOLLOW       1
524 tk 684
BUTTON_BEH_SCRUB        0
685
BUTTON_BEH_MENU         0
1203 tk 686
BUTTON_BEH_BOOKMARK     1
524 tk 687
BUTTON_BEH_STEP_VIEW    0
688
BUTTON_BEH_TRG_LAYER    0
689
BUTTON_BEH_PAR_LAYER    0
690
BUTTON_BEH_TRACK_SEL    0
691
BUTTON_BEH_TEMPO_PRESET 0
692
 
693
 
694
##################################################
600 tk 695
# Special Behaviour of ALL button
735 tk 696
# 0: only parameter layers are modified by ALL function
697
# 1: trigger and parameter layers are modified by ALL function
600 tk 698
##################################################
699
BUTTON_BEH_ALL_WITH_TRIGGERS 0
700
 
701
 
702
##################################################
524 tk 703
# Encoder Functions
704
# SR = 0: encoder disabled
705
# SR = 1..16: DIN assignment
706
# Types: NON_DETENTED, DETENTED1, DETENTED2, DETENTED3
707
##################################################
708
 
709
#              SR  Pin  Type
1494 tk 710
ENC_DATAWHEEL   1   0   DETENTED3
524 tk 711
 
712
# the speed value for the datawheel which is used when the "FAST" button is activated:
713
ENC_DATAWHEEL_FAST_SPEED 3
714
 
715
#        SR  Pin  Type
1494 tk 716
ENC_GP1   5   0   DETENTED3
717
ENC_GP2   5   2   DETENTED3
718
ENC_GP3   5   4   DETENTED3
719
ENC_GP4   5   6   DETENTED3
720
ENC_GP5   6   0   DETENTED3
721
ENC_GP6   6   2   DETENTED3
722
ENC_GP7   6   4   DETENTED3
723
ENC_GP8   6   6   DETENTED3
724
ENC_GP9   8   0   DETENTED3
725
ENC_GP10  8   2   DETENTED3
726
ENC_GP11  8   4   DETENTED3
727
ENC_GP12  8   6   DETENTED3
728
ENC_GP13  9   0   DETENTED3
729
ENC_GP14  9   2   DETENTED3
730
ENC_GP15  9   4   DETENTED3
731
ENC_GP16  9   6   DETENTED3
524 tk 732
 
733
# the speed value for GP encoders which is used when the "FAST" button is activated:
734
ENC_GP_FAST_SPEED 3
735
 
736
# Auto FAST mode: if a layer is assigned to velocity or CC, the fast button will be automatically
737
# enabled - in other cases (e.g. Note or Length), the fast button will be automatically disabled
738
ENC_AUTO_FAST        1
1341 tk 739
 
740
# optional BPM encoder
741
#              SR  Pin  Type
1494 tk 742
ENC_BPM         0   0   DETENTED3
1341 tk 743
 
744
# the speed value for the BPM encoder which is used when the "FAST" function is activated
745
ENC_BPM_FAST_SPEED 3