Subversion Repositories svn.mios

Rev

Rev 1089 | Rev 1117 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
814 tk 1
HEADER 3 MIDIbox SEQ V4 User Manual --- Menu Pages
796 tk 2
 
3
<P CLASS=INFO><B><A HREF="midibox_seq_manual.html">Back to main page...</A></B></P>
4
 
5
<H1>MIDIbox SEQ V4</H1>
814 tk 6
<H1>User Manual --- Menu Pages</H1>
796 tk 7
 
813 tk 8
<H2> <IMG SRC="images/bullet.gif" ALT=""> Edit Screen </H2>
9
<P CLASS=DESC>This is the main screen which is visible after startup. From any other menu page you can always go back to this screen by pushing the EDIT button.<BR>
10
<CENTER><IMG SRC="midibox_seq/cs4/edit1.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
11
The <B>upper line</B> shows following informations:
12
<UL CLASS=CL>
13
  <LI><B>G1T1:</B> the group/track number (1,2,3,4) which is displayed in most menu pages at upper left corner. If multiple groups and/or tracks are selected, a M is displayed instead of the number.<BR>
14
The track group can be changed in the PATTERN menu, with the TrackSel (F4) button or with the 4 optional GROUP buttons (not part of the original MBSEQ V2/V3 frontpanel, but part of the MIDIbox SEQ V4 panel)<BR>
15
The track can be changed with the 4 TRACK buttons</LI>
16
  <LI><B>Chn 1/Def:</B> the MIDI channel and MIDI port to which the track is sending.</LI>
17
  <LI><B>A:Note:</B> the active layer (A,B,C,..P), and the parameter which is assigned to the layer.<BR>
18
The parameter layer can be selected with the 3 LAYER buttons. Layer C button either toggles between C and D, or it shows a selection page for all parameter layers if the track is partitioned for more than 4 layers.</LI>
19
  <LI><B>A:Gate:</B> the active trigger layer (A,B,C,..H), and the trigger function which is assigned to the layer<BR>
20
The trigger layer can selected with the TrgSel (F3) button, or with the optional Trigger Selection buttons which are part of the MIDIbox SEQ V4 frontpanel.</LI>
21
  <LI><B>Step:</B> the step number which is currently edited (1..256)<BR>
22
  <LI><B>G#1 Vel:127 Len: 75%:</B> informations about the MIDI event which is sent by the selected step. It differs depending on the event assigned to the step, e.g. for a chord step the name of the chord will be displayed, for a CC step you will see the CC number and value.<BR>
23
A new step is selected when the appr. rotary encoder is moved or by pressing the appr. GP button.</LI>
24
</UL></P>
25
 
26
 
27
<P CLASS=DESC>Alternatively, each track can get an individual name and category which are displayed at the upper display line. In this example, the name "SoloSynthline2" and the category name "Synth" has been choosen. Name/Category can be edited in the Event menu.</P>
28
 
29
<CENTER><IMG SRC="midibox_seq/cs4/edit2.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
30
 
31
<P CLASS=DESC>The <B>lower line</B> shows the values of 16 steps within the selected track view and parameter layer. They can be directly modified with the 16 GP rotary encoders below these items. The displayed parameter of the step changes with the active layer. E.g. in layer C the gatelength is controlled, which is visualised with vertical bars:<BR>
32
<CENTER><IMG SRC="midibox_seq/cs4/edit3.gif" width=481 height=19 ALT="Edit Length"></IMG></CENTER></P>
33
 
972 tk 34
<P CLASS=DESC>Pressing the SELECT button will open a special page which allows to select different view modes:
981 tk 35
<CENTER><IMG SRC="midibox_seq/cs4/edit13.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
972 tk 36
     <UL CLASS=CL>
981 tk 37
     <LI> <B>Step View:</B> you already know it;
38
<CENTER><IMG SRC="midibox_seq/cs4/edit1.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
39
     <LI> <B>Trigger View:</B> left page allows to select the step, Gate,
972 tk 40
       Accent, Roll, Glide, Skip, Random Gate and Random Velocity.<BR>
41
       Right Page allows to edit up to 8 parameter layers.
981 tk 42
<CENTER><IMG SRC="midibox_seq/cs4/edit14.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
43
     <LI> <B>Layer View:</B> allows to select the step, Gate and up to 14
972 tk 44
       parameter layer. Especially nice for custom chord editing.
981 tk 45
<CENTER><IMG SRC="midibox_seq/cs4/edit15.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
46
     <LI> <B>303 View:</B> provides a 303ish interface to select the Step,
972 tk 47
       Gate, Accent, Glide, Octave, Note, Velocity and up to 9
48
       additional parameter layers
981 tk 49
<CENTER><IMG SRC="midibox_seq/cs4/edit16.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
50
     <LI> <B>Step Select:</B> allows to enable/disable the steps which are controlled by the ALL function. E.g., with the pattern below, only steps 1,2,5,6,9,10,13,14 (plus the edited step) will be changed if the ALL function has been activated:
825 tk 51
<CENTER><IMG SRC="midibox_seq/cs4/edit12.gif" width=481 height=19 ALT="Edit Screen"></IMG></CENTER><BR>
52
If the track consists of more than 16 steps, the selection pattern will be applied on each step view.
1077 tk 53
     <LI> <B>Random Generator:</B> enters the Random Generator page (see detailed menu page description later in this chapter)
54
<CENTER><IMG SRC="midibox_seq/cs4/trkrnd1.gif" width=481 height=19 ALT="Random"></IMG></CENTER><BR>
55
     <LI> <B>Euclid Generator:</B> enters the Euclidean Rhythm Generator page (see detailed menu page description later in this chapter)
56
<CENTER><IMG SRC="midibox_seq/cs4/trkeuclid1.gif" width=481 height=19 ALT="Euclid"></IMG></CENTER><BR>
981 tk 57
     </UL>
825 tk 58
</P>
59
 
60
 
61
 
813 tk 62
<H2> <IMG SRC="images/bullet.gif" ALT=""> Gatelength </H2>
63
<P CLASS=DESC>The gatelength parameter needs some additional explanations, as it not only allows to set the length of a note, but also to trigger a glide (overlapping note) and to play an event multiple times.</P>
64
 
919 tk 65
<P CLASS=DESC>The Length can be adjusted from 0% to 100% in 96 steps.<BR>
813 tk 66
<CENTER><IMG SRC="midibox_seq/cs4/edit4.gif" width=481 height=19 ALT=""></IMG></CENTER>
67
<CENTER><IMG SRC="midibox_seq/cs4/edit5.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
68
<P CLASS=DESC>In following audio example, the gatelength of all steps is varied with a single rotary encoder - this can be achieved by pushing the ALL button: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_gl_normal.mp3"#ffffff**</P>
69
 
70
<P CLASS=DESC>The next example demonstrates the usage of the glide function. The track length is reduced to 4 steps. Following notes are played with a fixed gatelength of 92%:
71
<CENTER><IMG SRC="midibox_seq/cs4/edit6.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
72
<P CLASS=DESC>Later, the length will be set to "glide" at step 2 - this note will overlap the next note at step 3 in order to trigger a Glide on synths which support "fingered portamento" or "SusKey"</P>
73
<CENTER><IMG SRC="midibox_seq/cs4/edit7.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
74
<P CLASS=DESC>Finally glide will also be activated on the third step:</P>
75
<CENTER><IMG SRC="midibox_seq/cs4/edit8.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
76
<P CLASS=DESC>It sounds like demonstated in this MP3 sample:**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_gl_glide.mp3"#ffffff** </P>
77
 
78
 
79
<H2> <IMG SRC="images/bullet.gif" ALT=""> Drum Edit Page</H2>
80
 
81
<P CLASS=DESC>If a track is configured for drum mode, the edit page changes to a special view which doesn't show the Note names anymore, but small icons instead:<BR>
82
<CENTER><IMG SRC="midibox_seq/cs4/edit_d1.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
83
 
84
<P CLASS=DESC>Up to 16 drum instruments can be triggered per track. You can change to another instrument by pressing the TrgSel (F3) or TrgLayer C button:<BR>
85
<CENTER><IMG SRC="midibox_seq/cs4/edit_d2.gif" width=481 height=19 ALT=""></IMG></CENTER><BR>
86
This page shows animated VU meters for each instrument (to give you an overview about the played instruments), and allows you to select the instrument with GP buttons.</P>
87
 
88
<P CLASS=DESC>The name of the selected drum instrument is displayed at the right upper corner of the edit screen:
89
<CENTER><IMG SRC="midibox_seq/cs4/edit_d3.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
90
 
91
 
92
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Selection Page</H2>
93
 
94
<P CLASS=DESC>The track selection page shows animated VU meters for each track to give you an overview about the track activity. In addition, it allows you to select one or more tracks by using the GP buttons:
95
<CENTER><IMG SRC="midibox_seq/cs4/trksel1.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
96
 
97
 
98
<H2> <IMG SRC="images/bullet.gif" ALT=""> Parameter Selection Page</H2>
99
 
100
<P CLASS=DESC>By pressing the ParSel button (or ParLayer C button if the track is partitioned for more than 4 layers), the parameter selection page will be displayed which shows VU meters for each layer. By pressing a GP button a parameter layer can be selected for editing:
101
<CENTER><IMG SRC="midibox_seq/cs4/parsel1.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
102
 
103
<H2> <IMG SRC="images/bullet.gif" ALT=""> Trigger Selection Page</H2>
104
 
105
<P CLASS=DESC>Each track provides 8 trigger layers, which can be selected by pressing the TrgSel (F3) or Trigger Layer C button:
106
<CENTER><IMG SRC="midibox_seq/cs4/trgsel1.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
107
 
108
<H2> <IMG SRC="images/bullet.gif" ALT=""> Step Selection Page</H2>
109
 
110
<P CLASS=DESC>The StepView (F2) Button changes to a zoomed view of the edit page to give you a nice overview (if the track is configured for more than 64 steps, the dots for each step will be smaller). Use the GP buttons to change to another step view:
111
<CENTER><IMG SRC="midibox_seq/cs4/stepsel1.gif" width=481 height=19 ALT=""></IMG></CENTER></P>
112
 
113
 
114
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Event Configuration (Shortcut: MENU+GP Button #2)</H2>
115
<P CLASS=INFO>Allows you to change the basic track setup: the type of MIDI events which should be sent by the track to a specific MIDI Channel and MIDI Port.<BR>
116
<CENTER><IMG SRC="midibox_seq/cs4/trkevent1.gif" width=481 height=19 ALT="Track Event"></IMG></CENTER><BR>
117
<UL CLASS=CL>
118
  <LI><B>Track Type (Partitioning): </B> each track has a step memory of 1024 bytes, and a trigger memory of 2048 bits. There are predefined modes which simplify the partitioning of the available memory to free assignable parameter and trigger layers.</P>
119
 
120
<P><TABLE WIDTH=550 BORDER=0 CELLSPACING=1 CELLPADDING=1>
121
  <TR>
122
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Mode</STRONG></FONT></TD>
123
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Steps</STRONG></FONT></TD>
124
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Parameter Layers</STRONG></FONT></TD>
125
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Trigger Layers</STRONG></FONT></TD>
126
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Instruments</STRONG></FONT></TD>
127
  </TR>
128
  <TR> <TD CLASS=TABCOLOR2>Note</TD>  <TD CLASS=TABCOLOR2>64</TD> <TD CLASS=TABCOLOR2>16</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
129
  <TR> <TD CLASS=TABCOLOR2>Note</TD>  <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
130
  <TR> <TD CLASS=TABCOLOR2>Note</TD>  <TD CLASS=TABCOLOR2>256</TD> <TD CLASS=TABCOLOR2>4</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
131
  <TR> <TD CLASS=TABCOLOR2>Chord</TD> <TD CLASS=TABCOLOR2>64</TD> <TD CLASS=TABCOLOR2>16</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
132
  <TR> <TD CLASS=TABCOLOR2>Chord</TD> <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
133
  <TR> <TD CLASS=TABCOLOR2>Chord</TD> <TD CLASS=TABCOLOR2>256</TD> <TD CLASS=TABCOLOR2>4</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
134
  <TR> <TD CLASS=TABCOLOR2>CC</TD>    <TD CLASS=TABCOLOR2>64</TD> <TD CLASS=TABCOLOR2>16</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
135
  <TR> <TD CLASS=TABCOLOR2>CC</TD>    <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
136
  <TR> <TD CLASS=TABCOLOR2>CC</TD>    <TD CLASS=TABCOLOR2>256</TD> <TD CLASS=TABCOLOR2>4</TD> <TD CLASS=TABCOLOR2>8</TD> <TD CLASS=TABCOLOR2>1</TD> </TR>
137
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>64</TD>  <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>2</TD> <TD CLASS=TABCOLOR2>16</TD> </TR>
138
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>2 (32 steps only)</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>16</TD> </TR>
139
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>2</TD> <TD CLASS=TABCOLOR2>8</TD> </TR>
140
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>256</TD> <TD CLASS=TABCOLOR2>2 (64 steps only)</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>8</TD> </TR>
905 tk 141
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>64</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>16</TD> </TR>
142
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>128</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>8</TD> </TR>
143
  <TR> <TD CLASS=TABCOLOR2>Drum</TD>  <TD CLASS=TABCOLOR2>256</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>1</TD> <TD CLASS=TABCOLOR2>4</TD> </TR>
813 tk 144
</TABLE>
145
</LI>
146
<LI>Parameter layers can be assigned to following functions:
147
  <UL CLASS=CL>
148
    <LI><B>None:</B> the parameter layer has no function.
149
    <LI><B>Note:</B> controls the key and octave of a step. Notes can be assigned to multiple layers for polyphonic playing.
150
    <LI><B>Chord:</B> a chord is generated instead of a single note. 32 chords are predefined and can be transposed by +/- 2 octaves. All notes are aligned to C scale, the track transpose function has to be used to play different scales.
151
      <UL CLASS=CL>
152
        <LI><B>A-C:</B> Major I, Major II, Major III (transposed variants)</LI>
153
        <LI><B>D-F:</B> Root note, 3rd note, 5th note (single notes)</LI>
154
        <LI><B>G,H:</B> Root+3rd, Root+5th</LI>
155
        <LI><B>I-N:</B> Maj6, Maj7, Maj8, Maj9, Maj10, Maj12 (4-note chords)</LI>
156
        <LI><B>O,P:</B> Sus4 and Maj+</LI>
157
        <LI><B>a-c:</B> Minor I, Minor II, Minor III (transposed variants)</LI>
158
        <LI><B>d-f:</B> Root note, 3rdMin note, 5th note (single notes)</LI>
159
        <LI><B>g,h:</B> Root+3ndMin, Root+5th</LI>
160
        <LI><B>i-n:</B> Min6, Min7, Min8, Min9, Min10, Min12 (4-note chords)</LI>
161
        <LI><B>o-p:</B> Co7 and Min+</LI>
162
      </UL></LI>
163
    <LI><B>Velolcity:</B> controls the velocity value for all notes/chords of the instrument.
164
    <LI><B>Length:</B> controls the gatelength of all notes of the instrument
165
    <LI><B>CC:</B> plays a selectable CC number
166
    <LI><B>Pitch:</B> sends a PitchWheel event
167
    <LI><B>Prob:</B> sets the probability that the step will be played (1..100%)
168
    <LI><B>Delay:</B> delays the step for 1..96 microticks
919 tk 169
    <LI><B>Roll:</B> plays the step 2..5 times with ascenting/descenting velocity (intensity: 0..15). 127 variations are available - great for drum patterns!<BR>
170
The distance between the repeats is predefined to: 48 ticks on 2 repeats, 32 ticks on 3 repeats, 36 ticks on 4 repeats, 32 ticks on 5 repeats.
171
    <LI><B>Roll2:</B> plays the step 2..5 times. Instead of velocity the distance between the steps can be directly controlled.<BR>
172
The first number means, how often the event will be played (2, 3, 4 or 5 times), the second number specifies the number of clock ticks between the events (accuracy depends on number of repeats). Examples:</P>
173
<P CLASS=DESC><IMG SRC="midibox_seq/tutorial4/gatelength_v4_2x48.gif" width=200 height=109 ALT="" align="left">One step consists of 96 clock ticks. With the 2x48 setting the note will be played at the beginning and in the middle of the step. </IMG></P>
174
<BR><BR><BR>
175
<P CLASS=DESC><IMG SRC="midibox_seq/tutorial4/gatelength_v4_3x63.gif" width=200 height=109 ALT="" align="left">With 3x63, the note will be played three times with a distance of 63 clock steps - at 0, 63 and 126. A delay of 126 crosses the step range of 96, so that the last note slips into the range of the second step. This sometimes results into nice, unexpected grooves! :-)</P>
176
<P CLASS=DESC>In following example, various roll2 parameters are used for the snare drum. Here a screenshot of the 32 step sequence (which is played 2 times):
177
    **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_gl_multi.mp3"#ffffff**</P>
178
 
813 tk 179
  </UL></LI>
180
<LI>The <B>MIDI Channel</B> can be selected from 1-16.</LI>
181
<LI>Following <B>MIDI Ports</B> are available:<BR>
182
  <UL CLASS=CL>
183
    <LI><B>Default:</B> the default port as selected in the MIDI configuration page (usually USB1)</LI>
184
    <LI><B>USB1..USB4:</B> 4 independent USB ports are available which are visible for your operating system</LI>
1004 tk 185
    <LI><B>OUT1..OUT4:</B> 3 physical MIDI OUT ports are provided by the MBHP_CORE_STM32 resp. MBHP_CORE_LPC17 module. The remaining one is reserved for the emulated MBSEQ</LI>
813 tk 186
    <LI><B>IIC1..IIC4:</B> to select the optional MBHP_IIC_MIDI ports</LI>
931 tk 187
    <LI><B>OSC1..OSC4:</B> allows to send/receive events via Ethernet</LI>
919 tk 188
    <LI><B>Bus1..Bus4:</B> virtual ports. They are used to control the transposer/arpeggiator (see loopback description below), and can optionally be used for the MIDI router function (see description of MIDI configuration page)</LI>
813 tk 189
    <LI><B>AOUT:</B> the AOUT port. See description below</LI>
190
  </UL></LI>
853 tk 191
  <LI><B>Edit Name:</B>
192
        <CENTER><IMG SRC="midibox_seq/cs4/trkevent2.gif" width=481 height=19 ALT="Track Event"></IMG></CENTER><BR>
193
         Track and Drum instrument names can be edited so fast and easy like typing a SMS on a mobile phone. Use the first 10 GP buttons or encoders to cycle the characters (like on a telephone keypad), and the remaining buttons/encoders to select a character directly, move the cursor, delete/insert characters, selecting a preset (with the encoder) and to exit the editor.
194
  <LI><B>INIT:</B> this item will flash whenever the selected partition type requires a re-initialisation of the track memory. Press&Hold the GP button below this item for two seconds to confirm the initialisation (this will clear all steps!)</LI>
195
  <LI><B>PRESET:</B> this button opens a dialog which allows to select a preset file (left side), or to store a new preset:
196
<CENTER><IMG SRC="midibox_seq/cs4/trkevent3.gif" width=481 height=19 ALT="Track Event"></IMG></CENTER><BR>
197
Different sections can be selected before the preset is imported:
198
<CENTER><IMG SRC="midibox_seq/cs4/trkevent4.gif" width=481 height=19 ALT="Track Event"></IMG></CENTER><BR>
199
Exporting a track: just enter the name - done:
200
<CENTER><IMG SRC="midibox_seq/cs4/trkevent5.gif" width=481 height=19 ALT="Track Event"></IMG></CENTER><BR>
201
Advantages of using preset files:
202
  <UL CLASS=CL>
203
    <LI>You can store your favourite track configurations, melody lines, drum loops, etc. in separate files to recall them later
204
    <LI>You can prepare drum maps for different instruments
205
    <LI>You can prepare CC setups for different instruments
206
    <LI>You can share the files (which are stored in the preset/ directory) with other users
207
    <LI>You can view and edit the files with a common text editor.
208
  </UL>
1015 tk 209
  Note that presets can also be exported/imported on the fly with the Multi Copy/Paste function:
210
  <UL CLASS=CL>
211
   <LI> press MENU+COPY to export all selected tracks
212
     into the /PRESETS folder on SD Card. The resulting files are named
213
     COPY[track].V4T (the [track] numbers are independent from the actual track
214
     position)
215
 
216
   <LI> press MENU+PASTE to import "COPY[track].V4T"
217
     files from the /PRESETS folder into all selected tracks, starting from
218
     COPY1.V4T to (up to) COPY16.V4T
219
 
220
   <LI> use these new functions to quickly copy&paste tracks between patterns
221
     and sessions, to create temporary backups, to duplicate tracks, or whatever.<BR>
222
     Note that you can also import these COPY[track].V4T files from the
223
     MENU-&gt;Event-&gt;PRESETS menu, e.g. to exclude certain parts of the preset
224
   </UL>
813 tk 225
</UL></P>
226
 
227
 
228
<H2> <IMG SRC="images/bullet.gif" ALT=""> IIC Ports</H2>
229
 
230
<P CLASS=INFO>The <A HREF="mbhp_iic_midi.html">MBHP_IIC_MIDI</A> module allows you to add 4 additional, independent (!) MIDI outputs. Main advantage of multiple MIDI ports is reduced latency (as MIDI events can be sent in parallel), and relaxed MIDI channel handling (for 4 synths you don't need to take care about the MIDI channel at all)</P>
231
 
232
 
919 tk 233
<H2> <IMG SRC="images/bullet.gif" ALT=""> Bus1..4: the Loopback Ports</H2>
813 tk 234
 
919 tk 235
<P CLASS=INFO>A loopback port forwards Note and CC events to the MIDI handler of the sequencer itself. This opens a wide range of possibilities, especially for experimental, non-static, self-changing sequences. Classical usecase is a setup of self-modifiying and loopbacked tracks which play completely autarkic for several minutes without an interaction from your side.</P>
813 tk 236
 
919 tk 237
<P CLASS=DESC>When a track sends MIDI notes, it can control the transposer and arpeggiator w/o an external keyboard. For the transposer a single note should be sent, for the arpeggiator either four notes (from different parameter layers) or Chords (from a single parameter layer).</BR>
813 tk 238
 
919 tk 239
<P CLASS=INFO>Loopbacks can be send to four busses. Each track provides the possibility to select the Bus to that the Transposer/Arpeggiator should listen. This allows to transpose tracks individually. The MIDI channel to which a note is sent doesn't matter.</P>
240
 
813 tk 241
<P CLASS=DESC>A CC loopback allows to control sequencer parameters which are listed in <A HREF="midibox_seq/mbseqv4_cc_implementation.txt">the CC implementation chart</A>. In difference to Note events, the MIDI channel gets an important purpose here, as it selects the target track of which the parameters should be modified. The CC# corresponds with the NRPN LSB number.<BR>
242
Example: Loopback Channel #3, CC#49 controls the Octave Transpose of Track 3</P>
243
 
244
<P CLASS=DESC>CC#1 has a special purpose, as it allows to control the Morphing parameter, which works track independent. Accordingly, Morphing can be controlled from any selected MIDI channel</P>
245
 
246
 
910 tk 247
<P CLASS=DESC><I>Hot tip (1): put the loopback tracks into a separate pattern. This allows you to play different chord lines from a "master pattern" without changing the "slave patterns".</I></P>
813 tk 248
<P CLASS=DESC><I>Hot tip (2): clock a loopback track with unqueal divider values, this can lead to surprising results!</I></P>
249
 
250
<P CLASS=DESC>In following MP3 sample a loopback track transposes a second track which plays a bass line: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_loopback.mp3"#ffffff**<BR>
251
From 0:00-0:07 the bassline is played w/ the base note C-3, from 0:00-0:23 the bassline is sometimes transposed by one octave (C-4) (Track Mode->Transpose activated). The loopback track is clocked at 384ppqn/4*16 (4th notes)<BR>
252
From 0:24 I selected an alternative pattern which sends various notes to the loopback port at a clock rate of 384ppqn/4*13 - the result sounds like a live jam on the keyboard, but it was more or less a random effect initiated by the asynchronously clocked loopback track. :)</P>
253
 
254
 
255
<H2> <IMG SRC="images/bullet.gif" ALT=""> AOUT Port</H2>
256
 
257
<P CLASS=INFO>The AOUT Port allows you to control the analog outputs of a <A HREF="mbhp_aout.html">MBHP_AOUT</A>, <A HREF="mbhp_aout_lc.html">MBHP_AOUT_LC</A> or <A HREF="http://www.midibox.org/dokuwiki/aout_ng">MBHP_AOUT_NG</A> module. 8 gate triggers are available at port J5A/J5B of the core module (enabled by default in the MBSEQ_HW.V4 file)</P>
258
 
259
<P CLASS=DESC>MIDI Channel encoding:<BR>
260
<TABLE WIDTH=575 BORDER=0 CELLSPACING=1 CELLPADDING=1>
261
  <TR>
262
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Event</STRONG></FONT></TD>
263
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Chn.</STRONG></FONT></TD>
264
    <TD CLASS=TABCOLOR1><FONT SIZE=2><STRONG>Behaviour</STRONG></FONT></TD>
265
  </TR>
266
  <TR>
267
    <TD CLASS=TABCOLOR2>CC</TD>
268
    <TD CLASS=TABCOLOR2>1..8</TD>
269
    <TD CLASS=TABCOLOR2><I>(channel itself has no effect)</I><BR>
270
                CC Number #16: CV Ouput #1, Gate #1 always set<BR>
271
                CC Number #17: CV Ouput #2, Gate #2 always set<BR>
272
                CC Number #18: CV Ouput #3, Gate #3 always set<BR>
273
                CC Number #19: CV Ouput #4, Gate #4 always set<BR>
274
                CC Number #20: CV Ouput #5, Gate #5 always set<BR>
275
                CC Number #21: CV Ouput #6, Gate #6 always set<BR>
276
                CC Number #22: CV Ouput #7, Gate #7 always set<BR>
277
                CC Number #23: CV Ouput #8, Gate #8 always set</TD>
278
  </TR>
279
  <TR>
280
    <TD CLASS=TABCOLOR2>CC</TD>
281
    <TD CLASS=TABCOLOR2>9</TD>
282
    <TD CLASS=TABCOLOR2>CV Ouput #1, Gate #1 always set, CC Number ignored</TD>
283
  </TR>
284
  <TR>
285
    <TD CLASS=TABCOLOR2>CC</TD>
286
    <TD CLASS=TABCOLOR2>10</TD>
287
    <TD CLASS=TABCOLOR2>CV Ouput #2, Gate #2 always set, CC Number ignored</TD>
288
  </TR>
289
  <TR>
290
    <TD CLASS=TABCOLOR2>CC</TD>
291
    <TD CLASS=TABCOLOR2>11</TD>
292
    <TD CLASS=TABCOLOR2>CV Ouput #3, Gate #3 always set, CC Number ignored</TD>
293
  </TR>
294
  <TR>
295
    <TD CLASS=TABCOLOR2>CC</TD>
296
    <TD CLASS=TABCOLOR2>12</TD>
297
    <TD CLASS=TABCOLOR2>CV Ouput #4, Gate #4 always set, CC Number ignored</TD>
298
  </TR>
299
  <TR>
300
    <TD CLASS=TABCOLOR2>CC</TD>
301
    <TD CLASS=TABCOLOR2>13</TD>
302
    <TD CLASS=TABCOLOR2>CV Ouput #5, Gate #5 always set, CC Number ignored</TD>
303
  </TR>
304
  <TR>
305
    <TD CLASS=TABCOLOR2>CC</TD>
306
    <TD CLASS=TABCOLOR2>14</TD>
307
    <TD CLASS=TABCOLOR2>CV Ouput #6, Gate #6 always set, CC Number ignored</TD>
308
  </TR>
309
  <TR>
310
    <TD CLASS=TABCOLOR2>CC</TD>
311
    <TD CLASS=TABCOLOR2>15</TD>
312
    <TD CLASS=TABCOLOR2>CV Ouput #7, Gate #7 always set, CC Number ignored</TD>
313
  </TR>
314
  <TR>
315
    <TD CLASS=TABCOLOR2>CC</TD>
316
    <TD CLASS=TABCOLOR2>16</TD>
317
    <TD CLASS=TABCOLOR2>CV Ouput #8, Gate #8 always set, CC Number ignored</TD>
318
  </TR>
319
  <TR>
320
    <TD CLASS=TABCOLOR2>Note</TD>
321
    <TD CLASS=TABCOLOR2>1</TD>
322
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #1, Gate #1 triggered</TD>
323
  </TR>
324
  <TR>
325
    <TD CLASS=TABCOLOR2>Note</TD>
326
    <TD CLASS=TABCOLOR2>2</TD>
327
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #2, Gate #2 triggered</TD>
328
  </TR>
329
  <TR>
330
    <TD CLASS=TABCOLOR2>Note</TD>
331
    <TD CLASS=TABCOLOR2>3</TD>
332
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #3, Gate #3 triggered</TD>
333
  </TR>
334
  <TR>
335
    <TD CLASS=TABCOLOR2>Note</TD>
336
    <TD CLASS=TABCOLOR2>4</TD>
337
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #4, Gate #4 triggered</TD>
338
  </TR>
339
  <TR>
340
    <TD CLASS=TABCOLOR2>Note</TD>
341
    <TD CLASS=TABCOLOR2>5</TD>
342
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #5, Gate #5 triggered</TD>
343
  </TR>
344
  <TR>
345
    <TD CLASS=TABCOLOR2>Note</TD>
346
    <TD CLASS=TABCOLOR2>6</TD>
347
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #6, Gate #6 triggered</TD>
348
  </TR>
349
  <TR>
350
    <TD CLASS=TABCOLOR2>Note</TD>
351
    <TD CLASS=TABCOLOR2>7</TD>
352
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #7, Gate #7 triggered</TD>
353
  </TR>
354
  <TR>
355
    <TD CLASS=TABCOLOR2>Note</TD>
356
    <TD CLASS=TABCOLOR2>8</TD>
357
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #8, Gate #8 triggered</TD>
358
  </TR>
359
  <TR>
360
    <TD CLASS=TABCOLOR2>Note</TD>
361
    <TD CLASS=TABCOLOR2>9</TD>
362
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 and #2 triggered</TD>
363
  </TR>
364
  <TR>
365
    <TD CLASS=TABCOLOR2>Note</TD>
366
    <TD CLASS=TABCOLOR2>10</TD>
367
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #3 and #4 triggered</TD>
368
  </TR>
369
  <TR>
370
    <TD CLASS=TABCOLOR2>Note</TD>
371
    <TD CLASS=TABCOLOR2>11</TD>
372
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #5, Velocity -> CV Out #6, Gate #5 and #6 triggered</TD>
373
  </TR>
374
  <TR>
375
    <TD CLASS=TABCOLOR2>Note</TD>
376
    <TD CLASS=TABCOLOR2>12</TD>
377
    <TD CLASS=TABCOLOR2>Key Value -> CV Out #7, Velocity -> CV Out #8, Gate #7 and #8 triggered</TD>
378
  </TR>
379
  <TR>
380
    <TD CLASS=TABCOLOR2>Note</TD>
381
    <TD CLASS=TABCOLOR2>13</TD>
382
    <TD CLASS=TABCOLOR2>Velocity -> CV Out #1, Key Value -> CV Out #2, Gate #1 and #2 triggered</TD>
383
  </TR>
384
  <TR>
385
    <TD CLASS=TABCOLOR2>Note</TD>
386
    <TD CLASS=TABCOLOR2>14</TD>
387
    <TD CLASS=TABCOLOR2>Velocity -> CV Out #3, Key Value -> CV Out #4, Gate #3 and #4 triggered</TD>
388
  </TR>
389
  <TR>
390
    <TD CLASS=TABCOLOR2>Note</TD>
391
    <TD CLASS=TABCOLOR2>15</TD>
392
    <TD CLASS=TABCOLOR2>Velocity -> CV Out #5, Key Value -> CV Out #6, Gate #5 and #6 triggered</TD>
393
  </TR>
394
  <TR>
395
    <TD CLASS=TABCOLOR2>Note</TD>
396
    <TD CLASS=TABCOLOR2>16</TD>
397
    <TD CLASS=TABCOLOR2>DOUT drum gates/triggers<BR>
1004 tk 398
Notes to AOUT Channel #16 (C-1, C#1, D-1, ... upwards) will be redirected to up to 64 digital outputs of the DOUT chain. Each key number triggers an individual gate for 1 mS, accordingly this mode is predestinated for drum triggers. The used shift registers have to be defined in the MBSEQ_HW.V4 file (DOUT_GATE_SR1..8)
813 tk 399
</TD>
400
  </TR>
401
</TABLE></P>
402
 
403
 
404
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Mode Page (Shortcut: MENU+GP Button #3)</H2>
405
<P CLASS=INFO>Allows you to select following options:<BR>
406
<CENTER><IMG SRC="midibox_seq/cs4/trkmode1.gif" width=481 height=19 ALT="Track Mode"></CENTER></IMG>
407
<UL CLASS=CL>
408
  <LI><B>Track Mode:</B><BR>
409
    <UL CLASS=CL>
410
      <LI><B>Normal:</B> no transpose and no arpeggiator function</LI>
411
      <LI><B>Transpose:</B> Notes and CCs can be transposed with an external keyboard or from a Loopback track</LI>
919 tk 412
      <LI><B>Arpeggiator:</B> Notes are controlled in a special way: instead of specifying the actual note, you make a note selection and an octave transposition selection. The note is selected from the currently received chord and the octave transposition is relative to that note. Both selections are done for each individual step and are displayed in a special format concisting of note and octave transposition.<BR>
413
The following example shows the notation:<BR>
414
Let's assume the Chord C-3, E-3, G-3, B-3 is played on the external MIDI keyboard and that the pattern<BR>
415
1+0 --- 1-1 --- 1+1 --- 2+0 --- 3+0 --- 4+0 --- 2+0 3+1 2-1 4+2<BR>
416
is entered into the sequencer.<BR>
417
<UL CLASS=CL>
418
<LI>at the first step the note C-3 (first note, no transpose) will be output.
419
<LI>at step 3, C-2 (first note, -1 octave transpose).
420
<LI>at step 5, C-4 (first note, +1 octave transpose).
421
<LI>at step 7, E-3 (second note, no octave transpose).
422
<LI>at step 9, G-3 (third note, no octave transpose).
423
<LI>at step 11, B-3 (forth note, no octave transpose).
424
<LI>at step 13, E-3 (second note, no octave transpose).
425
<LI>at step 14, G-4 (third note, +1 octave transpose).
426
<LI>at step 15, E-2 (second note, -1 octave transpose).
427
<LI>at step 16, B-5 (forth note, +2 octave transpose).
428
</UL>
813 tk 429
Audio Example: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_arp.mp3"#ffffff**<BR>
430
You cannot imagine how easy it is to setup complex arpeggiator textures when you never tried this by yourself :) - the <A HREF="http://www.youtube.com/watch?v=UtnUMpykQLc" TARGET="_blank">Session #4 video</A> gives a nice example of some arpeggios which where created within a few number of minutes<BR>
431
When you turn the rotary encoder within the Edit Screen to select the "Arp Event" for a step, you may notice events with the format "x*y".<BR>
432
These are Multi-Arp events. They play the appr. step so many times as notes are held on the external keyboard. Each key will be
433
transposed by the specified octave value (-3..+3). Once all keys have been played, the sequencer continues with the next step of the track.<BR>
434
This feature has been explained in <A HREF="midibox_seq_tutorial4.html">Tutorial #4</A> for MBSEQ V2, and it is still available in MBSEQ V4<BR>
435
Audio Example for Multi-Arp Events: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseq_tutorial4_3.mp3"#ffffff**</LI>
436
    </UL>
919 tk 437
  <LI><B>Bus:</B> selects Bus1..Bus4 over which the Transposer/Arpeggiator should be controlled. Each bus provides a separate MIDI port/channel/keyboard zone that can be configured in the MIDI page. Alternatively busses can transfer the output of loopback tracks as described earlier.<BR>
438
     Since each track has an own bus assignment, it's possible to transpose tracks individually.</LI>
813 tk 439
  <LI><B>Hold:</B> the last key or chord is held until a new key/chord is played on the keyboard (only relevant for Tranpose/Arpeggiator mode)</LI>
440
  <LI><B>Sort:</B> only relevant for arpeggiator mode: the note stack will be sorted when this function is active (default); arpeggios will be played with notes "as played" when this functions is deactivated.</LI>
441
  <LI><B>Restart:</B> the track is restarted when a new key/chord is played</LI>
1031 tk 442
  <LI><B>Force Scale:</B> played notes are mapped to the global scale, which can be selected in the Fx-Scale menu page, accordingly only notes are played which match with the selected harmony. This is especially useful when the track consists of randomly generated notes! 127 predefined scales are available!<BR>
443
<A HREF="midibox_seq/scalesMidiboxSeqv4.pdf" TARGET="_blank">Nuke created some nice graphics for all scales - thank you!!!</A></LI>
813 tk 444
  <LI><B>Sustain:</B> omits the "Note Off" event - notes are played endless, independent from the gatelength. Especially useful for strings and pads!</LI>
445
</UL>
796 tk 446
</P>
447
 
813 tk 448
 
449
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Direction Page (Shortcut: MENU+GP Button #4)</H2>
450
<P CLASS=INFO>Allows you to select following options:<BR>
451
<CENTER><IMG SRC="midibox_seq/cs4/trkdir1.gif" width=481 height=19 ALT="Direction"></CENTER></IMG>
452
<UL CLASS=CL>
453
  <LI><B>Forward, Backward, Pendulum, PingPong, Random Direction, Random Step, Random Direction + Step:</B> should be selfexplaining</LI>
454
  <LI><B>Fwd/Back/Replay Progression Parameters:</B> they allow to play the steps in an incontinous order.<BR>
455
For example: "Steps Fwd: 5, Jump Back: 2" will play the steps in following order: 1-2-3-4-5-4-5-6-7-8-7-8-9-10-11-10-..<BR>
456
The "Replay" parameter allows to repeat a portion of steps the given number of times.<BR>
457
For Example: "Steps Fwd: 3, Repeat: x2" will play the steps in following order: 1-2-3-1-2-3-4-5-6-4-5-6-7-8-9-7-8-9-10..<BR>
458
<I>Hot tip: My favourite setting is: "Steps Fwd: 5, Jump Back: 3, Replay: 1x"</I><BR>
459
In following MP3 sample a static sequence has been varied with different Step Fwd/Jump Back/Replay values while it was playing:
460
<IMG SRC="midibox_seq/cs4/trkdir2.gif" width=481 height=19 ALT=""></IMG><BR>
461
And this is how it sounds: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_progression.mp3"#ffffff**</LI>
462
  <LI><B>Repeat/Skip/Interval Progression Parameters:</B> have been introduced in MIDIbox SEQ V4 to simplify the creation of "Berlin School"
463
patterns (as known from artists like Klaus Schulze, Tangerine Dream, ...) - the Iteration parameter defines a range at
464
which a step will be repeated several times, or several steps will be skipped.<BR>
465
For example: "Itv.:4, Repeat:2, Skip:0" will play the steps in following order: 1-2-3-4-4-4-5-6-7-8-8-8-9-10-11-12-12-12-..<BR>
466
Another example: "Itv.:4, Repeat:0, Skip:1" will play the steps in following order: 1-2-3-4-6-7-8-9-10-12-13-14-15-2-3-4-5-7-8-9-10-..<BR>
814 tk 467
Very interesting results can be achieved in conjunction with the groove function when it controls the velocity at a different interval. Also a second track which controls CC parameters with different track progression can lead to nice variations!<BR>
468
Examples: A simple 4-step sequence is played, and the tone colour is varied from a separate 16-step CC track:<BR>
469
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len4n.mp3"#ffffff**<BR>
470
It sounds repetitive and boring.<BR>
471
Now we set Interval=4 and Skip=1:<BR>
472
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len4s.mp3"#ffffff**<BR>
473
Or we set Repeat=1, so that each 4th note will be played twice:<BR>
474
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len4r.mp3"#ffffff**<BR>
475
Let's try it with a 16 note track:<BR>
476
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len16n.mp3"#ffffff**<BR>
477
Again repetitive and boring!<BR>
478
Let's try Interval=4 and Skip=1:<BR>
479
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len16s.mp3"#ffffff**<BR>
480
Or Interval=4 and Repeat=1:<BR>
481
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len16r.mp3"#ffffff**<BR>
482
Or Interval=5 (uneven) and Repeat=3 (uneven as well):<BR>
483
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_progitv_len16x.mp3"#ffffff**<BR>
484
Fun!</LI>
813 tk 485
  <LI><B>Synch to Measure:</B> the clock divider, but also the song position and progression parameters will be reset after each measure. This can result into very rhythmically results, try it out with different divider and progression values. The length of a measure (1..256 steps) can be configured in the Options menu.</LI>
486
</UL>
487
 
488
 
489
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Clock Divider Page (Shortcut: MENU+GP Button #5)</H2>
490
<P CLASS=INFO>Allows you to select following options:<BR>
491
<CENTER><IMG SRC="midibox_seq/cs4/trkdiv1.gif" width=481 height=19 ALT="Clock Divider"></CENTER></IMG>
492
<UL CLASS=CL>
493
  <LI><B>Clock Divider:</B> MBSEQ V4 works at a resolution of up to 384 ppqn, which is 16 times faster the MIDI clock standard of 24 ppqn. The divider allows you to clock the track with a fraction of the MIDI clock.<BR>
494
A divider value of 4 clocks the track with normal resolution, accordingly each step plays a 16th note, and the gatelength can be varied between 1..96 steps!<BR>
495
A divider value of 2 clocks the track two times faster, accordingly each step plays a 32th note, the gatelength can be varied between 1..48 steps.<BR>
496
With a divider value of 64, each step will play a whole note (extremely slow, especially useful for strings/pads)</LI>
497
  <LI><B>Normal/Triplet:</B> with the "normal" setting, the 384ppqn clock will be pre-divided by 24, whereas with "triple" it will be pre-divided by 16. This results into a triplet timebase, where (for example) 24 steps instead of 16 are played per measure during the same time period. The track length has to be adapted accordingly, or "Synch to measure" should be activated to ensure that the track is in synch with tracks which are played at a "normal" timebase.<BR>
498
Example for a track clocked at a triplet timebase 16T. A bassline with "normal" timebase 16 is added at 0:03, a drumline at 0:07:<BR>
499
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_triple.mp3"#ffffff**
500
</LI>
501
 
502
  <LI><B>Synch to Measure:</B> the clock divider, but also the song position and progression parameters will be reset after each measure. This can result into very rhythmically results, try it out with different divider and progression values. The length of a measure (1..256 steps) can be configured in the Options menu.</LI>
503
  <LI><B>Quick Selection:</B> quick access to most useful timebases. Triplet timebases are marked with a 'T'</LI>
504
</UL>
505
</P>
506
<P CLASS=DESC><I>Hot tip: try multiple tracks with unqual divider values like 7 or 13 for experimental sequences!</I></P>
507
<P CLASS=DESC>Drum sequence w/ different clock dividers: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_clkdivider.mp3"#ffffff**</P>
508
<P CLASS=DESC>(give the drummer another beer...)</P>
509
 
510
 
511
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Length Page (Shortcut: MENU+GP Button #6)</H2>
512
<P CLASS=INFO>Allows you to select following options:<BR>
513
<CENTER><IMG SRC="midibox_seq/cs4/trklen1.gif" width=481 height=19 ALT="Track Length"></CENTER></IMG>
514
<UL CLASS=CL>
515
  <LI><B>Length:</B> each individual track can play 1 to 32 steps</LI>
516
  <LI><B>Loop:</B> allows you to set a loop point to which the track will jump back once it has reached the end</LI>
981 tk 517
  <LI><B>Quick Selection:</B> allows you to quickly select most commonly used track lengths by pushing the button below the menu item.<BR>
518
  Alternatively a quick selection view for Loops can be activated, which is especially nice for stuttering variations during a live session:
519
<CENTER><IMG SRC="midibox_seq/cs4/trklen2.gif" width=481 height=19 ALT="Track Length"></CENTER></IMG>
813 tk 520
</UL>
981 tk 521
 
813 tk 522
<P CLASS=DESC><I>Hot tip: try multiple tracks with unqual track lengths like 3, 5, 13, 15, 27 for experimental sequences!</I></P>
523
<P CLASS=DESC>3 tracks w/ different tracklengths: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_tracklen.mp3"#ffffff**</P>
524
<P CLASS=DESC>First a track with lenght=16 is played, then a second track with length=9, than a third track with length=13. At 0:25 all three tracks are played together.</P>
525
 
981 tk 526
<P CLASS=DESC><I>Hot tip2: The length/loop presets are now stored in MBSEQ_C.V4 file (located in session directory) under the name "QuickSelLength", "QuickSelLoopLength" and "QuickSelLoopLoop". They could be edited with a text editor if you would like to have different values.</I></P>
813 tk 527
 
981 tk 528
 
813 tk 529
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Transpose Page (Shortcut: MENU+GP Button #7)</H2>
530
<P CLASS=INFO>Allows you to select following options:<BR>
531
<CENTER><IMG SRC="midibox_seq/cs4/trktran1.gif" width=481 height=19 ALT="Transpose"></CENTER></IMG>
532
<UL CLASS=CL>
533
  <LI><B>Octave Transpose:</B> transposes the notes of a track by -7..+7 octaves. If the transposed key value is lower than 0, or higher than 127, the resulting value will be transposed back octavewise until it is within the range of 0..127 again</LI>
534
  <LI><B>Semitone Transpose:</B> push the SELECT button to toggle between Octave/Semitone transpose selection. The semitone transpose increases/decreases the key value by +/- 7 semitones.</LI>
535
</UL></P>
536
 
537
 
538
<H2> <IMG SRC="images/bullet.gif" ALT=""> Track Groove Page (Shortcut: MENU+GP Button #8)</H2>
539
<P CLASS=INFO>Allows you to select following options:<BR>
540
<CENTER><IMG SRC="midibox_seq/cs4/trkgrv1.gif" width=481 height=19 ALT="Groove"></CENTER></IMG>
541
<UL CLASS=CL>
542
  <LI><B>Groove Style:</B> selects a groove template - following styles are available:<BR>
543
    <UL CLASS=CL>
544
      <LI><B>Shuffle:</B> each second step will be delayed by 0..127 micro ticks - this can be controlled with the intensity value.</LI>
545
      <LI><B>Inv. Shuffle:</B> like Shuffle, but steps with uneven numbers (1, 3, 5, ...) will be delayed</LI>
546
      <LI><B>Shuffle 2:</B> each second step will be delayed by a fixed number of microticks (8), each fourth step will be delayed by the value given with the intensity parameter</LI>
547
      <LI><B>Inv. Shuffle 2:</B> like Shuffle 2, but steps with uneven numbers (1, 3, 5, ...) will be delayed</LI>
548
      <LI><B>Shuffle 3:</B> uses following delay sequence: 1:0, 2:8, 3:4, 4:intensity</LI>
549
      <LI><B>Shuffle 4:</B> each second step will be delayed by 8 micro ticks. The intensity parameter controls the velocity</LI>
550
      <LI><B>Shuffle 5:</B> each second step will be delayed by 8 micro ticks. The intensity parameter controls the gatelength</LI>
551
      <LI><B>Custom #1..16:</B> configurable styles</LI>
552
    </UL>
553
  </LI>
554
  <LI><B>Intensity:</B> available as VPOS/VNEG parameter to vary the style without creating a new groove template. Also nice for live tweaks to find "best matching" grooves!
555
</UL></P>
556
 
910 tk 557
<P CLASS=DESC>Custom #1..#16 global groove styles can be freely edited. They are stored on SD Card (MBSEQ_G.V4 file) and available for all patterns of a session:
813 tk 558
<CENTER><IMG SRC="midibox_seq/cs4/trkgrv2.gif" width=481 height=19 ALT="Groove"></CENTER></IMG>
559
<UL CLASS=CL>
560
  <LI><B>Step:</B> selects the groove step (1-16)</LI>
561
  <LI><B>Delay:</B> selects a delay modifier from VNEG,-127..0..+126,VPOS</LI>
562
  <LI><B>Length:</B> selects a gatelength modifier from VNEG,-127..0..+126,VPOS</LI>
563
  <LI><B>Velocity:</B> selects a velocity modifier from VNEG,-127..0..+126,VPOS</LI>
564
  <LI><B>NumSteps:</B> selects the groove template length (1-16). When starting editing it makes sense to start with value 2 or 4 to get immediate response while the sequence is playing.</LI>
565
</UL>
932 tk 566
<P CLASS=CL><I>Hot tip: Use a custom groove with a reduced number of steps (e.g. 2, 3 or 4) and different velocity/length values on a track which controls the steps with progression parameters like "Itv.4, Repeat: 1, Skip:0". It rocks! This is one of my most favourite features! It can lead to fantastic results, especially if velocity doesn't modulate the volume of a sound, but sound parameters like CutOff, VCF Decay, FM Timbre, etc.!</I></P>
813 tk 567
 
568
 
569
<H2> <IMG SRC="images/bullet.gif" ALT=""> Trigger Assignments Page (Shortcut: MENU+GP Button #9)</H2>
570
<P CLASS=INFO>There are eight trigger layers A..H which control additional trigger functions. They can be set for each step individually with the 16 GP buttons within the Edit screen. Following triggers can be assigned to the trigger layers:<BR>
571
<CENTER><IMG SRC="midibox_seq/cs4/trgasg1.gif" width=481 height=19 ALT="Trigger Assignments"></CENTER></IMG>
572
<UL CLASS=CL>
573
  <LI><B>Gate:</B> controls if a step should be played or not. If the Gate trigger is not assigned to any layer, all steps will be played, otherwise only the selected steps will be played.</LI>
574
  <LI><B>Acc.:</B> Accent - the velocity will be set to maximum (127)</LI>
575
  <LI><B>Roll:</B> step will be triggered 3 times with short delays - the same effect can be achieved with much more variations by setting the gatelength to 2xdelay, 3xdelay or 4xdelay (delay free definable) - the roll trigger is only an alternative, more comfortable solution</LI>
576
  <LI><B>Glide:</B> overlaps two notes, so that a synth which provides a "fingered portamento" or "SusKey" function will activate the glide function</LI>
577
  <LI><B>Skip:</B> the selected steps will be skipped, the sequencer jumps continues with the next step where the skip trigger is not set.</LI>
578
  <LI><B>R.G.:</B> Random Gate - the step will be played randomly. This is especially useful for drum lines to increase the variation w/o creating multiple tracks
579
  <LI><B>R.V.:</B> Random Value - the step values will be randomized</LI>
580
  <LI><B>NoFx:</B> the step won't be forwarded to Fx functions like Echo, Humanizer and Limiter</LI>
581
</UL></P>
582
 
583
<H2> <IMG SRC="images/bullet.gif" ALT=""> Manual Step Trigger Page (Shortcut: MENU+GP Button #11)</H2>
584
<P CLASS=INFO><CENTER><IMG SRC="midibox_seq/cs4/manualtrg1.gif" width=481 height=19 ALT="Manual Step Trigger"></CENTER></IMG>
585
<P CLASS=DESC>Push a GP button to trigger a step manually. Only the steps of selected tracks will be played. If the sequencer is running, it will continue from the position you've triggered. Accordingly, this page can also be used for live adjustments of the sequencer position.</P>
586
<P CLASS=DESC>The selected tracks will be synched to measure when the SELECT button is pressed in this page. This can sometimes be useful for live situations - e.g., while you changed the track positions, they could be out-of-synch to the main beat. Pressing the SELECT button will properly synch them back.</P>
587
 
588
 
589
<H2> <IMG SRC="images/bullet.gif" ALT=""> Morph Page (Shortcut: MENU+GP Button #12)</H2>
590
<P CLASS=INFO>This feature allows you to smoothly morph between one and another part of the track. The morph value (0-127) can either be controlled from this menu page, or with an external MIDI controller (e.g. with a ModWheel):
591
<CENTER><IMG SRC="midibox_seq/cs4/trkmorph1.gif" width=481 height=19 ALT="Morphing"></CENTER></IMG><BR>
592
<UL CLASS=CL>
593
  <LI><B>Mode:</B> on or off</LI>
594
  <LI><B>Val.</B> the morph position - can also be controlled with an external MIDI controller</LI>
595
  <LI><B>Destination Range</B> the second part of the track to which the first part should be morphed (e.g. if the track has a length of 16 steps, the second part could be located at step 17-32</LI>
596
  <LI><B>Vertical bar at right page:</B> graphical representation of the morph value</LI>
597
</UL>
598
<P CLASS=DESC>Slow morphing between two arp patterns: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_morph.mp3"#ffffff**</P>
599
<P CLASS=DESC>Fast morphing between two CC patterns: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv3_morph2.mp3"#ffffff**<BR>
600
(4 CC tracks are used to control several bandpass filters)</P>
601
 
602
<H2> <IMG SRC="images/bullet.gif" ALT=""> BPM Page (Shortcut: MENU+GP Button #13)</H2>
603
<P CLASS=INFO>MIDIbox SEQ can work as MIDI clock master or slave. The MIDI clock (24ppqn) is multiplied by 16 to 384ppqn, which means, that the length of a 16th note is 96 microticks. Microticks are relevant for the gatelength and especially the groove function.<BR>
604
<CENTER><IMG SRC="midibox_seq/cs4/bpm1.gif" width=481 height=19 ALT="BPM"></CENTER></IMG>
605
<UL CLASS=CL>
606
  <LI><B>BPM Clock Mode</B> switches between master/slave clock and auto mode.
607
    <UL CLASS=CL>
608
      <LI>In <B>master</B> mode, the tempo will be generated internally with a selectable BPM rate. The sequencer will transmit MIDI Clock/Start/Stop/Continue events to the MIDI Out ports for synchronising with external gear (this has to be enabled for each port separately in the MIDI config page)</LI>
927 tk 609
      <LI>In <B>slave</B> mode, the sequencer will be controlled by incoming MIDI Clock/Start/Stop/Continue events for synchronisation with an external MIDI clock master. Note that the sequencer will halt as long as no MIDI clock is received in this mode!</LI>
813 tk 610
      <LI>In <B>auto</B> mode, the sequencer will automatically switch between master and slave mode. This is the most comfortable setting, and therefore enabled by default.<BR>
611
          Slave mode is selected once a MIDI Clock/Start/Stop/Continue event has been received.<BR>
612
          Master mode is selected, when no MIDI clock command is received and the PLAY button is pressed.</LI>
613
    </UL>
614
  <LI><B>Preset:</B> select 1 of 16 tempo presets</LI>
615
  <LI><B>Tempo:</B> only relevant for master mode: the BPM rate (2.5-300.0) - accuracy is 0.1 BPM, use ENC3 to set the rough value in +/- 1 steps, and ENC4 to set the fine value in 0.1 steps</LI>
616
  <LI><B>Ramp:</B> defines a timespan of 1..99s at which the tempo change should take place.</LI>
617
  <LI><B>Fire Preset:</B> changes the tempo (slowly) at the given ramp time. E.g., if the current tempo is 120, the new tempo is 140, ramp time is 5s: press this button to change the tempo from 120..121..122...140 within 5 seconds.</LI>
618
  <LI><B>Preset page:</B> displays a preset page which allows you to select one of 16 tempo presets with GP buttons (very nice in conjunction with ramp times)</LI>
619
  <LI><B>MIDI Clock In:</B> enable the MIDI clock in receiver for each individual MIDI IN port</LI>
620
  <LI><B>MIDI Clock Out:</B> enable the MIDI clock out sender for each individual MIDI OUT port</LI>
621
  <LI><B>Ext.Restart:</B> sends a MIDI clock start event to all MIDI devices at the next measure - a very useful feature to re-synchronize external MIDI gear to the MIDIbox.<BR>
622
    To evaluate this function, try following steps:
623
    <UL CLASS=CL>
624
      <LI>connect a MIDI sequencer (or synth. with sequencer function) to your MBSEQ and configure it for MIDI slave mode.</LI>
625
      <LI> ensure that MIDI clock is enabled for all OUT ports which should send the MIDI start event (+ a MIDI clock)</LI>
626
      <LI> press PLAY button of MBSEQ - the external sequencer should start to play as well.</LI>
627
      <LI> now stop the external sequencer
628
      <LI> (change a patch, sound, or whatever...)
629
      <LI> press Ext.Restart: the external sequencer should start once MBSEQ reaches the first step.
630
      <LI> Note that the same function can be accessed by pressing MENU+METRONOME. A dedicated button can be assigned to this function as well (requires a modification in MBSEQ_HW.V4</LI>
631
    </UL>
632
  <LI><B>Tap Tempo:</B> Tap the button at least four times to define the BPM tempo manually. If the sequencer is currently stopped, it will start automatically with the 5th tap. The same function can be accessed by pressing MENU+PLAY</LI>
633
</UL>
634
 
814 tk 635
<CENTER><IMG SRC="midibox_seq/cs4/bpm2.gif" width=481 height=19 ALT="BPM Presets"></CENTER></IMG>
636
<P CLASS=DESC>Following MP3 demonstrates slow tempo changes which are controlled from the BPM Preset page - note that a such a tempo change doesn't block the sequencer. E.g., during the ramp time you can switch to the PATTERN page to select a new pattern, you can mute tracks in the MUTE page, etc.:<BR>
637
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_demo_tempo_sweeps.mp3"#ffffff**</P>
638
 
639
 
813 tk 640
<H2> <IMG SRC="images/bullet.gif" ALT=""> Metronome Page (only available from the main menu)</H2>
641
<P CLASS=INFO>Allows you to select following options:<BR>
642
<CENTER><IMG SRC="midibox_seq/cs4/metronome1.gif" width=481 height=19 ALT="Metronome"></CENTER></IMG><BR>
643
<UL CLASS=CL>
644
  <LI><B>on/off:</B> same function as the dedicated METRONOME button</LI>
645
  <LI><B>Port:</B> the MIDI port to which the metronome will send</LI>
646
  <LI><B>Channel:</B> the channel to which the metronome will send</LI>
647
  <LI><B>Measure Note:</B> note which will be send on each measure</LI>
648
  <LI><B>Beat Note:</B> note which will be send on each beat</LI>
649
</UL>
650
 
651
<H2> <IMG SRC="images/bullet.gif" ALT=""> Save Page (Shortcut: MENU+GP Button #14)</H2>
652
<P CLASS=INFO>Allows you to save the pattern of the currently active pattern group:<BR>
653
<CENTER><IMG SRC="midibox_seq/cs4/save1.gif" width=481 height=19 ALT="Save"></CENTER></IMG></P>
654
<P CLASS=DESC>Select the target bank with GP6, and the target pattern with GP7. While changing it, the name of the pattern which is already stored at this position will be displayed at the right LCD:
655
<CENTER><IMG SRC="midibox_seq/cs4/save2.gif" width=481 height=19 ALT="Save"></CENTER></IMG></P>
656
 
853 tk 657
<P CLASS=DESC>Finally press SAVE (GP8 button). You will be asked for a Category and Pattern name:
658
<CENTER><IMG SRC="midibox_seq/cs4/save3.gif" width=481 height=19 ALT="Save"></CENTER></IMG>
659
Use the first 10 GP buttons or encoders to cycle the characters (like on a telephone keypad), and the remaining buttons/encoders to select a character directly, move the cursor, delete/insert characters, selecting a preset (with the encoder) and finally to SAVE the pattern.</P>
813 tk 660
 
661
 
662
<H2> <IMG SRC="images/bullet.gif" ALT=""> MIDI Page (Shortcut: MENU+GP Button #15)</H2>
919 tk 663
<P CLASS=INFO>This page is divided into four subpages that have to be selected with the left sided GP buttons:<BR>
664
 
665
<P CLASS=INFO><B>Transposer and Arp.:</B>
813 tk 666
<CENTER><IMG SRC="midibox_seq/cs4/midi1.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG>
667
<UL CLASS=CL>
919 tk 668
  <LI><B>Bus:</B> four individual busses (Bus1..Bus4) are available for this function. Each bus provides separate note stacks for Transposer and Arpeggiator.</LI>
669
  <LI><B>Port:</B> the MIDI input port for the selected bus. If "ALL" is selected, MIDI data will be received from any port.</LI>
670
  <LI><B>Channel:</B> selects the MIDI channel over which the arpeggiator/transpose can be controlled, and CCs will be received (e.g. for the morph function). With "---" no events will be received (bus disabled)</LI>
671
  <LI><B>Lower/Upper:</B> defines the lower and upper note of a keyboard zone for transpose/arpeggiator function.<BR>
672
      With Lower = "---" and Upper = "G-8" the complete keyboard will be taken.<BR>
673
      Defining different (or overlapping) keyboard zones allows you to control the four Transposer/Arpeggiator busses from a single MIDI keyboard over the same MIDI channel.</LI>
674
  <LI><B>Mode:</B>
675
    <UL CLASS=CL>
676
      <LI><B>T&A:</B> MIDI events are routed to the Transposer/Arpeggiator notestacks
677
      <LI><B>Play:</B> MIDI events are directly routed to MIDI Port and Channel of the currently selected track. This allows you to play the selected track "live".
678
    </UL>
679
  <LI><B>Reset Stacks:</B> clears all note stacks. Useful if the MIDI keyboard (or external sequencer) has been disconnected from MIDIbox SEQ while some keys were still active.
680
</UL>
681
</P>
682
 
683
<P CLASS=INFO><B>Section Control:</B></P>
684
<P CLASS=INFO>It's possible to select sections of a track that should be played from a MIDI keyboard as demonstrated in following video:
685
<center><object width="400" height="300"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=8003266&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=8003266&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object></center></P>
686
 
687
<P CLASS=INFO>Each group (G1/2/3/4) has a separate selection zone on the keyboard.<BR>
688
Key C..B select section 1..12, the first key of the octave (C) plays the first section as usual, it has the same effect as if this feature is disabled.<BR>
689
The width of a section depends on the track length.<BR>
690
E.g., if the track length is set to 32, and if it consists of 256 steps, 8 sections are available which can be selected with Key C/C#/D/D#/E/F#/F/F#/G<BR>
931 tk 691
It is recommended to activate the "Follow" function under UTILITY-&gt;OPTIONS when using this feature, so that the edit display gets automatically updated whenever the section is changed.</P>
919 tk 692
 
693
<CENTER><IMG SRC="midibox_seq/cs4/midi2.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG>
694
<UL CLASS=CL>
695
  <LI><B>Port:</B> selects the MIDI port that should be used to select the sections.
696
  <LI><B>Channel:</B> selects the MIDI channel that should be used to select the sections.
697
  <LI><B>G1..G4:</B> selects the octave that should be used to select the sections for each pattern group individually. It is possible to assign all groups to the same octave if desired.
698
  <LI><B>Fwd:</B> optionally all octaves that are not selected by G1..G4 can be forwarded to the given port.
699
  <LI><B>Reset Stacks:</B> clears all note stacks. Useful if the MIDI keyboard (or external sequencer) has been disconnected from MIDIbox SEQ while some keys were still active.
700
</UL>
701
</P>
702
 
703
<P CLASS=INFO><B>MIDI Router:</B>
704
<P CLASS=INFO>Provides a simple possibility to route incoming MIDI events to synthesizers which are connected to the MIDI Out ports (which means: also to the AOUT port - MBSEQ replaces a CV interface!)
705
<CENTER><IMG SRC="midibox_seq/cs4/midi3.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG>
706
<UL CLASS=CL>
707
  <LI><B>Node:</B> 8 routing pathes are available<BR>
708
  <LI><B>IN:</B> selects the MIDI IN port.<BR>
709
  <LI><B>Source Channel:</B> either a dedicated source channel (1-16) or "all" channels can be selected</LI>
710
  <LI><B>OUT:</B> selects the MIDI output port</LI>
711
  <LI><B>Target Channel:</B> either a dedicated target channel (1-16) or "all" channels can be selected</LI>
712
  <LI><B>Default Port:</B> selects the port to which MIDI events should be sent if the "Def." port has been selected in the EVENT page.
713
</UL>
714
</P>
715
 
716
<P CLASS=INFO><B>Misc.:</B>
717
<CENTER><IMG SRC="midibox_seq/cs4/midi4.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG>
718
<UL CLASS=CL>
719
  <LI><B>BLM_SCALAR port:</B> see <A HREF="midibox_seq_manual_blm.html">this manual chapter</A>.
720
  <LI><B>MIDI Monitor:</B> enters the MIDI Monitor page:<BR>
721
    <CENTER><IMG SRC="midibox_seq/cs4/midi5.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG><BR>
722
    It shows most of the IN ports at the upper line (e.g. Bus4 isn't displayed), and most of the OUT ports at the lower line.<BR>
723
    Whenever an event is received or sent, the appr. item will show the event for a short moment.<BR>
724
    This gives you a great overview of the MIDI activity, especially to analyze the current track and MIDI router setup.<BR>
725
    <CENTER><IMG SRC="midibox_seq/cs4/midi6.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG><BR>
726
    By pressing the SELECT button, filters for MIDI Clock (F8) and Active Sense (FE) events can be enabled/disabled.<BR>
927 tk 727
    Both filters are activated by default. Once the clock filter is deactivated, the OUT/IN items will (probably) show CLK permanently as long as a MIDI clock is received/sent over the appr. port. This allows you to analyze the MIDI Clock In/Out settings as configured in the BPM page.
919 tk 728
    Once the Active Sense filter is deactivated, FE events will be displayed periodically on the appr. IN port if a connected MIDI keyboard sends such events.
813 tk 729
  </UL>
919 tk 730
</UL>
853 tk 731
 
813 tk 732
</UL>
733
 
734
 
735
 
736
<H2> <IMG SRC="images/bullet.gif" ALT=""> Record Page (Shortcut: UTILITY (F1)->Rec)</H2>
927 tk 737
<P CLASS=INFO>MIDIbox SEQ V4 provides a realtime (live) and step recording mode. Recording is always active as long as you are in this menu page. In distance to certain other sequencers, it is not required to stop an ongoing sequence in order to start recording.<BR>
813 tk 738
Incoming events will be immediately inserted into the selected track. If the current step already holds a note/CC, it will be replaced by the new one. The gatelength of a note will be recorded as well, it can allocate multiple steps. If a new note is played over such a "stretched" step, the previous note will be automatically split.<BR>
739
<P CLASS=INFO><CENTER><IMG SRC="midibox_seq/cs4/record1.gif" width=481 height=19 ALT="Record"></CENTER></IMG></P>
740
<P CLASS=DESC>The <B>realtime recording mode</B> supports monophonic note, polyphonic chords (chord 1/2 and note/note/note layer mode), and CC events, which are stored into the currently selected track while the sequencer is playing.</P>
741
<P CLASS=DESC>The <B>step recording mode</B> allows to input notes and CCs stepwise, the cursor will go to the next position after a new note/CC has been received and stored into the step. The cursor can be moved to another position with the rotary encoder below the "Step" item.</P>
742
<P CLASS=DESC>Any incoming CC number will be converted to the target CC as specified by the EVENT mode. This means, that you can use a single controller (e.g. a Modulation Wheel) to record the different CC lines.</P>
743
<P CLASS=DESC><B>AStart: </B> synchronized auto start of track recording. To use this feature, the sequencer has to be stopped. With the first played note, the sequencer will start and store the note into the first step.</P>
744
<P CLASS=DESC><B>TglGate: </B> toggles the gate of the currently select step. Useful to quickly enable/disable a step in step recording mode.</P>
905 tk 745
<P CLASS=DESC><B>Port: </B> the MIDI port to which your MIDI keyboard is connected.</P>
746
<P CLASS=DESC><B>Chn: </B> the MIDI channel used for recording.</P>
935 tk 747
<P CLASS=DESC><B>Forward MIDI:</B> if on (default): events played by an external keyboard were always immediately forwarded to the MIDI output. "off" disables this function for keyboards w/o a "local off" function.</P>
748
<P CLASS=DESC><B>Quantize:</B> than lower the percentage value, than lower the quantization (-&gt; events not shifted to the next step)</P>
813 tk 749
 
750
<P><center><object width="400" height="225">	<param name="allowfullscreen" value="true" />	<param name="allowscriptaccess" value="always" />	<param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=1628550&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" />	<embed src="http://vimeo.com/moogaloop.swf?clip_id=1628550&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="225"></embed></object><br /><a href="http://vimeo.com/1628550?pg=embed&amp;sec=1628550" TARGET="_blank">Midibox Sequencer V3 for Live Recording</a> from <a href="http://vimeo.com/user710438?pg=embed&amp;sec=1628550" TARGET="_blank">Stuart Mitchell</a></center></P>
751
 
752
 
1001 tk 753
<H2> <IMG SRC="images/bullet.gif" ALT=""> Live Play Page (Shortcut: UTILITY (F1)->Live)</H2>
754
 
755
<P CLASS=INFO>Inside this page notes (and drum instruments) can be played with the GP buttons.</P>
756
 
757
<P CLASS=INFO>In addition the 4 MIDI IN Busses for Transposer/Arpeggiator/Live Playing can be configured like in the MIDI Config page.
758
 
759
<CENTER><IMG SRC="midibox_seq/cs4/live1.gif" width=481 height=19 ALT="Live"></CENTER></IMG>
760
 
761
<P CLASS=INFO>Following Live Play parameters are available:</P>
762
<UL CLASS=CL>
763
  <LI><B>Track:</B> selection
764
  <LI><B>Mute:</B> mute/unmute the selected track
1004 tk 765
  <LI><B>Oct.:</B> Octavewise transpose
1001 tk 766
  <LI><B>Velocity:</B> (only used for GP button keyboard)
767
  <LI><B>FTS:</B> Force-To-Scale
768
  <LI><B>FX:</B> enables Humanizer, LFO, Limiter and Echo<BR>
769
       Note: the Echo effect will only work when the sequencer is running!
770
  <LI><B>Bus:</B> four individual busses (Bus1..Bus4) are available for this function. Each bus provides separate note stacks for Transposer and Arpeggiator.</LI>
771
  <LI><B>Port:</B> the MIDI input port for the selected bus. If "ALL" is selected, MIDI data will be received from any port.</LI>
772
  <LI><B>Channel:</B> selects the MIDI channel over which the arpeggiator/transpose can be controlled, and CCs will be received (e.g. for the morph function). With "---" no events will be received (bus disabled)</LI>
773
  <LI><B>Lower/Upper:</B> defines the lower and upper note of a keyboard zone for transpose/arpeggiator function.<BR>
774
      With Lower = "---" and Upper = "G-8" the complete keyboard will be taken.<BR>
775
      Defining different (or overlapping) keyboard zones allows you to control the four Transposer/Arpeggiator busses from a single MIDI keyboard over the same MIDI channel.</LI>
776
  <LI><B>Mode:</B>
777
    <UL CLASS=CL>
778
      <LI><B>T&A:</B> MIDI events are routed to the Transposer/Arpeggiator notestacks
779
      <LI><B>Play:</B> MIDI events are directly routed to MIDI Port and Channel of the currently selected track. This allows you to play the selected track "live".
780
    </UL>
781
  <LI><B>Reset Stacks:</B> clears all note stacks. Useful if the MIDI keyboard (or external sequencer) has been disconnected from MIDIbox SEQ while some keys were still active.
782
</UL>
783
</P>
784
 
813 tk 785
<H2> <IMG SRC="images/bullet.gif" ALT=""> Utility Page (Shortcut: MENU+GP Button #10 or F1)</H2>
786
<P CLASS=INFO>This page provides some useful functions for track modifications:<BR>
787
<CENTER><IMG SRC="midibox_seq/cs4/util1.gif" width=481 height=19 ALT="Utility"></CENTER></IMG><BR>
788
<UL CLASS=CL>
789
  <LI><B>Copy:</B> transfers the currently selected track into the copy buffer.<BR>
790
    If you press and hold the button below the COPY item, you can select the range which should be copied into the buffer with the GP encoders.<BR>
791
    The encoders left of or at the begin marker shift the begin position, the encoders right to the begin marker shift the end position.<BR>
792
    If you are unsure about the current position, just always use the leftmost encoder to move the begin marker, and the rightmost encoder to move the end marker.<BR>
793
    Releasing the copy button copies the selected range into the buffer. If the button is just pressed and depressed, the whole range will be copied.</LI>
794
  <LI><B>Paste:</B> transfers the copy buffer content into the track.<BR>
795
      Either the parameter/trigger layers, or the whole track will be copied. The behaviour of this function can be configured in the UTIL->OPT page<BR>
927 tk 796
    As long as the button below PASTE is pushed, you can specify the target position with a GP rotary encoder.<BR>
813 tk 797
    <I>Hot tip: This is the quickest solution to duplicate parts of a track!</I></LI>
798
  <LI><B>Clr:</B> clears the parameter/trigger layers, or the whole track. The behaviour of this function can be configured in the UTIL->OPT page</LI>
927 tk 799
  <LI><B>Move:</B> as long as the appr. button of this function is pushed, the edit page will be displayed, and steps can be moved with the encoder below the step.<BR>
813 tk 800
    It should be self explaining once you try it out! :)</LI>
927 tk 801
  <LI><B>Scroll:</B> as long as the button of this function is pushed, the steps of the current track can be scrolled with the rotary encoders. The start position of the scrolling function depends on the used rotary encoder. E.g., if the first GP encoder is used, the whole track will be scrolled, if the 9th rotary encoder is used, the 9th and all steps behind will be scrolled, and step 1-8 will be left untouched.</LI>
813 tk 802
  <LI><B>Random:</B> shortcut to the Random Generator (see below)</LI>
803
  <LI><B>Undo:</B> an undo function for the last Paste/Clear/Move/Scroll/Random operation.</LI>
804
  <LI><B>Save:</B> directly branches into the save menu page (shortcut)</LI>
805
  <LI><B>Rec.:</B> directly branches into the recording page (shortcut)</LI>
1001 tk 806
  <LI><B>Live:</B> directly branches into the live play page (shortcut)</LI>
813 tk 807
  <LI><B>Opt.:</B> directly branches into the options page (shortcut)</LI>
808
  <LI><B>PMte:</B> directly branches into the port muting page (shortcut)</LI>
809
  <LI><B>Disk:</B> directly branches into the disk page (shortcut)</LI>
810
  <LI><B>Mute:</B> mutes all tracks</LI>
811
  <LI><B>UnMte:</B> un-mutes all tracks</LI>
812
</UL>
813
 
814
 
815
<H2> <IMG SRC="images/bullet.gif" ALT=""> Random Generator Page (Shortcut: UTILITY (F1)->Rand)</H2>
816
<P CLASS=INFO>This menu page allows to randomize the layers based on individual "intensity" parameters. In difference to the "Humanize" function, random values are statically stored in the layers, so that they can be modified (within the EDIT screen, or with Utility functions like Scroll, Move, ...) until a "best matching" line has been found.<BR>
817
<P CLASS=INFO><CENTER><IMG SRC="midibox_seq/cs4/trkrnd1.gif" width=481 height=19 ALT="Random"></CENTER></IMG></P>
818
<UL CLASS=CL>
819
  <LI><B>Generate:</B> generates a new pattern based on the constraints given at the right LCD</LI>
820
  <LI><B>Clr:</B> clears the parameter/trigger layers, or the whole track. The behaviour of this function can be configured in the UTIL->OPT page</LI>
821
  <LI><B>Util:</B> shortcut to the Utility page - note that this menu has a shortcut to the Random page at the same position, so that you can quickly toggle between the two pages</LI>
822
  <LI><B>Undo:</B> copies back the overwritten pattern</LI>
1004 tk 823
  <LI><B>Scrl:</B> scrolls through the list of available layers (parameters/triggers/drum instruments)</LI>
824
  <LI><B>LayA/LayB/... (0..63):</B> defines the "intensity" for a Parameter Layer. If 0 ("--"), the layer won't be overwritten, otherwise all 32 steps get random values of 64 +/- intensity</LI>
825
  <LI><B>TrgA/TrgB/... (0..15):</B> defines the "intensity" for a Trigger Layer. If 0 ("--"), the layer won't be overwritten, if 15 ("All"), all steps will be activated. Otherwise the values 1..14 define the propability (6.25%..93.75%) that a step will be activated.</LI>
826
  <LI><B>Drum instrument names (0..15):</B> defines the "intensity" for a Drum instrument. If 0 ("--"), the layer won't be overwritten, if 15 ("All"), all steps will be activated. Otherwise the values 1..14 define the propability (6.25%..93.75%) that a step will be activated.</LI>
813 tk 827
</UL>
828
 
829
<P CLASS=DESC><I>Hot tip: use the randomizer in conjunction with the Force-to-Scale function for harmonic results!</I></P>
830
 
831
 
1077 tk 832
<H2> <IMG SRC="images/bullet.gif" ALT=""> Euclidean Rhythm Generator Page (Shortcut: SELECT-&gt;GP16 in EDIT page)</H2>
833
<P CLASS=INFO>This menu page provides an Euclidean Rhythm Generator which was inspired from <A HREF="http://ruinwesen.com/blog?id=216" TARGET="_blank">this Ruin&amp;Wesen blog article</A>.</P>
834
 
835
<P CLASS=INFO>In distance to common solutions which you can find around the web, the MBSEQ based generator writes static sequences into the track storage so that they can also be modified if desired! There are separate views for Drum and "Normal" tracks - for Drum tracks individual sequences can be generated for each instrument, while in a normal track the gates are only generated for a single instrument.<BR>
836
Another difference to common solutions is the random accent generator which adds some more variety to each step.</P>
837
 
838
<P CLASS=INFO>Normal Track View:<BR>
839
<CENTER><IMG SRC="midibox_seq/cs4/trkeuclid2.gif" width=481 height=19 ALT="Euclid"></CENTER></IMG></P>
840
<P CLASS=INFO>Drum Track View:<BR>
841
<CENTER><IMG SRC="midibox_seq/cs4/trkeuclid1.gif" width=481 height=19 ALT="Euclid"></CENTER></IMG></P>
842
 
843
<UL CLASS=CL>
844
  <LI><B>TrkLength:</B> selects the track length. The length should be adapted to the maximum loop length which is defined on the right display.</LI>
845
  <LI><B>Drum:</B> if the track is configured for drum mode, the instrument can be selected here.</LI>
846
  <LI><B>Note:</B> if the track is configured for drum mode, the note which is played by the instrument can be selected here (same as in MIDI event configuration page)</LI>
847
  <LI><B>VelN and VelA:</B> velocity used for normal and accented steps.</LI>
848
  <LI><B>RndA:</B> defines the probability for generating accented steps. Whenever the value is changed, accents will be generated immediately. If the track provides a parameter layer for velocity, these values will be changed instead of setting accent triggers. This allows to fine-adjust the velocity values later in EDIT page.</LI>
849
  <LI><B>Len:</B> defines the loop length of an euclidean pattern.<BR>
850
                  Changing this value will immediately re-generate pattern + accents</LI>
851
  <LI><B>Pulses:</B> defines the number of pulses which will be inserted into the loop.<BR>
852
                  Changing this value will immediately re-generate pattern + accents</LI>
853
  <LI><B>Offset:</B> allows to shift the generated pattern within the loop.<BR>
854
                  Changing this value will immediately re-generate pattern + accents</LI>
855
  <LI><B>Dots and Stars:</B> show the currently active gate/accent pattern (similar to the pattern shown on EDIT page) to give an overview about the generator results.</LI>
856
</UL>
857
 
858
<P CLASS=INFO>Demos:
859
<UL CLASS=CL>
860
  <LI>Changing the parameters while a single drum track is playing:<BR>
861
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_euclid1.mp3"#ffffff**<BR>
862
  <LI>Different chords have been entered into each step, and the gates are modified by the rhythm generator:<BR>
863
**MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_euclid2.mp3"#ffffff**<BR>
864
</UL>
865
 
866
 
813 tk 867
<H2> <IMG SRC="images/bullet.gif" ALT=""> Options Page (Shortcut: UTIL (F1)->Opt.)</H2>
868
<P CLASS=INFO>This page contains a selection of special options, for which no other page has been found:<BR>
869
<P CLASS=INFO><CENTER><IMG SRC="midibox_seq/cs4/opt1.gif" width=481 height=19 ALT="Record"></CENTER></IMG></P>
870
<UL CLASS=CL>
853 tk 871
  <LI><B>Measure X Steps:</B> defines the number of steps per measure.<BR>
813 tk 872
The length is 16 16th note steps by default, it can be set from 1..256 steps!<BR>
853 tk 873
The left encoder below the item allows to select 16 step wise, the right encoder and datawheel stepwise.<BR>
813 tk 874
This setting affects:
875
<UL CLASS=CL>
876
  <LI>the synch-to-measure function for clock divider reset</LI>
877
  <LI>the metronome ("Meas.Note" played after x steps)</LI>
878
  <LI>the song position displayed at song page (shows reference step position)</LI>
879
</UL>
880
Note: for max. steps != track length it makes sense to activate the synch-to-measure
881
function for each track (-> divider page), so that the tracks are always in synch
882
with the reference step position. It can be left deactivated if it is your intention
883
 to clock tracks asynchronously to the reference position.</LI>
884
 
853 tk 885
  <LI><B>Pattern Y Steps:</B> defines the number of steps per pattern.<BR>
886
This setting affects:
887
<UL CLASS=CL>
888
  <LI>the synch-to-measure function for pattern changes (pattern change after x steps)</LI>
889
  <LI>the loop incrementer in song mode</LI>
890
</UL>
891
 
899 tk 892
  <LI><B>Sync. (Pattern) Change:</B> if active, a pattern change made in the PATTERN or SONG page (Phrase mode) won't take place immediately, but will be synchronized to the pattern length of Y steps as defined at the left side of this item.</LI>
1001 tk 893
  <LI><B>RATOPC (Restart All Tracks On Pattern Change:</B> added due to requests from multiple users: all tracks will be restarted whenever a new pattern is selected. If SyncChange enabled, this means that all tracks will synchronize correctly independent from their track length, if SyncChange disabled, this means that you can do nice breaks while changing patterns (try it! ;-)</LI>
1004 tk 894
  <LI><B>Sync Mute:</B> if enabled, mutes set in the Mute page will be synched to the selected steps per measure. This feature is inspired from the "MIDI Clip Launcher" of Ableton Live.</LI>
895
  <LI><B>Sync Unmute:</B> the same for Unmute (behaviour can be selected separately).</LI>
813 tk 896
  <LI><B>Paste/Clr Behaviour:</B> allows you to change the behaviour of the Paste and Clear function:
897
    <UL CLASS=CL>
898
      <LI><B>Steps only:</B> only parameter and trigger layers will be cleared/pasted (default)</LI>
899
      <LI><B>Whole track:</B> the whole track configuration will be cleared/pasted. Only exception: MIDI channel and MIDI port will never be overwritten.</LI>
900
    </UL>
901
  </LI>
902
</UL>
903
 
904
 
905
<H2> <IMG SRC="images/bullet.gif" ALT=""> Mixer Page (Shortcut: MENU+GP Button #1)</H2>
906
<P CLASS=INFO>MIDIbox SEQ V4 provides a MIDI mixer which can handle up to 127 different maps. They can be stored and restored from a dedicated BankStick. Each mixer map consists of:<BR>
907
<UL CLASS=CL>
908
  <LI>16 free definable MIDI port assignments</LI>
909
  <LI>16 free definable MIDI channel assignments</LI>
910
  <LI>16 Program Change values</LI>
911
  <LI>16 Volume CC values</LI>
912
  <LI>16 Panorama CC values</LI>
913
  <LI>64 free assignable CCs (4 for each port)</LI>
914
</UL></P>
915
<P CLASS=DESC>There are 9 pages, which can be selected with the datawheel, or alternatively with the Rew/Fwd buttons when no song is playing: MIDI Port, MIDI Channel, Prog.Change, Volume, Panorama, CC1-4
916
<CENTER><IMG SRC="midibox_seq/cs4/mixer1.gif" width=481 height=19 ALT="Mixer Map"></CENTER></IMG></P>
917
<P CLASS=DESC>Values can be changed and sent with the GP encoders. The leftmost value ("----") deactivates the mixer item - no value will be sent.</P>
927 tk 918
<P CLASS=DESC>The ALL and FAST button are working as well. The ALL button provides the two known functions (values set to same value while button pushed, relative changes as long as LED active). The FAST function will be deactivated/activated automatically depending on the value range.</P>
813 tk 919
<P CLASS=DESC>Values are sent directly over the selected MIDI port - all ports are selectable, even Loopback and AOUT!</P>
920
 
921
<P CLASS=DESC>When the SELECT button is pressed, a utility page will be displayed:<BR>
922
<CENTER><IMG SRC="midibox_seq/cs4/mixer2.gif" width=481 height=19 ALT="Mixer Utilities"></CENTER></IMG></P>
923
<P CLASS=DESC>This page allows:<BR>
924
<UL CLASS=CL>
925
  <LI>to change and load a mixer map (one of 127)</LI>
926
  <LI>to Copy/Paste the map</LI>
927
  <LI>to clear the map</LI>
928
  <LI>to reload the map from BankStick</LI>
929
  <LI>to save the map into BankStick</LI>
930
  <LI>to dump the complete map via the MIDI/AOUT/Loopback ports</LI>
931
  <LI>to change the assignments for CC1/CC2/CC3/CC4</LI>
932
</UL></P>
933
 
934
<P CLASS=DESC><I>Hot tip: since the ports and channels are freely assignable and working totally independent from the selected sequencer patterns, the mixer map function behaves like a MIDI controller - you can define up to 127 maps which can be stored, restore, dumped and controlled in realtime!<BR>In song mode it is possible to dump one or more mixer maps before switching to a new pattern set.</I></P>
935
 
936
 
937
 
938
<H2> <IMG SRC="images/bullet.gif" ALT=""> Mute Screen </H2>
939
<P CLASS=DESC>Within the mute screen you can quickly mute/unmute tracks with the 16 GP buttons:<BR>
940
<CENTER><IMG SRC="midibox_seq/cs4/mute1.gif" width=481 height=19 ALT="Mute Screen"></IMG></CENTER><BR>
941
Each track has an animated VU meter to display the MIDI activity.</P>
942
 
943
<P CLASS=DESC>In addition, it's possible to mute individual parameter layers or drum instruments of a track by pressing&holding the Mute button:
944
<CENTER><IMG SRC="midibox_seq/cs4/mute2.gif" width=481 height=19 ALT="Mute Screen"></IMG></CENTER></P>
945
 
946
<P CLASS=DESC><I>Hot tip: nice breaks can be realized by activating SOLO and selecting multiple tracks - one after another - while the sequencer is playing. This technique is demonstrated at 2:44 of the <A HREF="http://www.youtube.com/watch?v=bgjET6dNA14" TARGET="_blank">Session #3 Video</A>.</I></P>
947
 
1004 tk 948
<P CLASS=DESC>With V4.0 beta43 and higher it's possible to synchronize Mutes and Unmutes to a selectable measure of 1..256 steps. This feature is inspired from the "MIDI Clip Launcher" of Ableton Live and can be enabled in the Utility->Options page! Whenever a GP button is pressed, the Mute won't take place immediately, but synchronized to the measure. A countdown will be displayed under the track name to inform you about an ongoing mute/unmute.</P>
813 tk 949
 
1004 tk 950
 
813 tk 951
<H2> <IMG SRC="images/bullet.gif" ALT=""> Pattern Screen </H2>
952
<P CLASS=DESC>Within the pattern screen you can quickly change the patterns of the four available track groups:<BR>
953
<CENTER><IMG SRC="midibox_seq/cs4/pattern1.gif" width=481 height=19 ALT="Pattern"></CENTER></IMG></P>
954
<P CLASS=DESC>The GP buttons and the track buttons have a special function within this menu page to improve the handling:<BR>
955
<UL CLASS=CL>
956
  <LI><B>Track buttons:</B> select between one of four track groups:<BR>
957
  <UL CLASS=CL>
958
    <LI><B>Group #1:</B> plays Track 1-4</LI>
959
    <LI><B>Group #2:</B> plays Track 5-8</LI>
960
    <LI><B>Group #3:</B> plays Track 9-12</LI>
961
    <LI><B>Group #4:</B> plays Track 13-16</LI>
962
  </UL></LI>
963
  <LI><B>GP buttons:</B> the 128 patterns are enumerated from A1 to h8. The 8 buttons at the left side switch between A-H/a-h (press the button twice to select a "lower case" character), the 8 buttons at the right side are used to select the pattern number (1-8).</LI>
964
</UL></P>
965
 
966
<P CLASS=DESC>Patterns can be changed with four of the rotary encoders as well. In addition, four rotary encoders allow to select the BankStick from which the pattern is loaded.</P>
967
<P CLASS=DESC>Each track has a small vertical bar which displays the MIDI activity while the sequencer is playing.</P>
968
 
969
 
1077 tk 970
<H2> <IMG SRC="images/bullet.gif" ALT=""> Song Page </H2>
1084 tk 971
<P CLASS=INFO>This page has two purposes - one purpose is to store pattern sets, mutes, tempo, mixer maps, etc... for all four groups which can be quickly recalled by pressing a GP button. This is the so called "Phrase Mode" (see below)</P>
825 tk 972
<P CLASS=INFO>The second (main) purpose is to chain and loop pattern sets without user interaction. You can toggle between Song and Phrase Mode with GP Encoder #8 or #9<BR>
813 tk 973
<CENTER><IMG SRC="midibox_seq/cs4/song1.gif" width=481 height=19 ALT="Song"></CENTER></IMG></P>
974
<UL CLASS=CL>
975
  <LI><B>Song:</B> currently 16 songs can be stored into a dedicated BankStick. Support for 32 songs is planned (will require a 64k BankStick!)</LI>
976
  <LI><B>Pos:</B> the song position - 128 positions are available, they are enumerated from A1..P8</LI>
977
  <LI><B>Action:</B> defines what should be done when this song position is reached:
978
    <UL CLASS=CL>
979
      <LI><B>Stop:</B> sequencer will be stopped.</LI>
853 tk 980
      <LI><B>x1..x16:</B> specified Pattern set will be played the given number of cycles (x1..x16). The pattern for each group (G1..G4) can be specified at the right side of the "action" item. If "-:--" is selected instead of the pattern number, the pattern won't be changed for this song step.</LI>
813 tk 981
      <LI><B>Jump Pos:</B> sequencer jumps to the specified position - allows to set loop points</LI>
982
      <LI><B>Jump Song:</B> sequencer jumps to the specified song</LI>
983
      <LI><B>Mixer:</B> the specified mixer map will be dumped. The sequencer will immediately continue with the next song position</LI>
984
      <LI><B>Tempo:</B> tempo will change by given BPM rate and ramp time</LI>
985
      <LI><B>Mutes:</B> allows to set/clear track mutes</LI>
986
    </UL>
987
  </LI>
988
</UL>
989
 
990
<P CLASS=DESC>For a fast usage the Track and Layer buttons have a special function in this screen: the Track buttons select the pattern group G1..G4, Layer button A sets the cursor to the "Song" item, Layer button B selects the "Position" item, Layer button C selects the "Action" item.</P>
991
 
992
<P CLASS=DESC>Song mode is demonstrated in the <A HREF="http://www.youtube.com/watch?v=gyffClGnFN4" TARGET="_blank">Session #2 video</A></P>
993
 
1113 tk 994
<P CLASS=DESC>Back to Phrase Mode: select the "Position" item by pushing Parameter Layer button B. By pushing a GP button, the sequencer will execute the action defined at song position A1, B1, C1..P1 (16 possible actions). If a pattern set or mixer map is defined at this song position, the sequencer will change to it and continue as normal - since we are not in song mode, the next song positions won't be processed.</P>
813 tk 995
<P CLASS=DESC>Phrases can also be combined with one or more mixer maps. In this case the first step (A1, B1, C1, ...) has to be assigned to a Mixer Map Action, whose content will be dumped out. The sequencer will go to the next song position, and check for a Mixer Map again. Once it has reached a position with a pattern set, it will change to the new set and give back control over pattern changes to the user.</P>
1084 tk 996
<P CLASS=DESC>On the same way it's possible to control Mutes and tempo.</P>
813 tk 997
 
998
 
825 tk 999
<P CLASS=DESC>When the SELECT button is pressed, a utility page will be displayed:<BR>
1000
<CENTER><IMG SRC="midibox_seq/cs4/song2.gif" width=481 height=19 ALT="Song Utilities"></CENTER></IMG></P>
1001
<P CLASS=DESC>This page allows:<BR>
1002
<UL CLASS=CL>
1003
  <LI>to change song number and position (like in the main page)</LI>
1004
  <LI>to Copy/Paste a song position</LI>
1005
  <LI>to clear a song position</LI>
1006
  <LI>to insert an empty item into the current song position</LI>
1007
  <LI>to delete the current song position (following positions will be shifted to the current position)</LI>
1008
  <LI>to change between Phrase and Song Mode</LI>
1077 tk 1009
  <LI>to take copy the currently played pattern set into the song position</LI>
825 tk 1010
</UL></P>
1011
 
1012
 
1077 tk 1013
<P CLASS=DESC>In song mode one additional item is available:<BR>
1014
<CENTER><IMG SRC="midibox_seq/cs4/song3.gif" width=481 height=19 ALT="Song Utilities"></CENTER></IMG></P>
1015
<UL CLASS=CL>
1016
  <LI>the optional <B>Guide Track</B> defines the loop length of a song position.<BR>
1017
     Once the last loop has been played, all tracks will be synchronized to step 1.<BR>
1018
     This allows to program breaks with a step length which is independent from the measure.
1019
</UL></P>
825 tk 1020
 
1077 tk 1021
 
813 tk 1022
<H2> <IMG SRC="images/bullet.gif" ALT=""> Disk Page (Shortcut: UTILITY (F1)->Disk)</H2>
1023
<P CLASS=INFO>This page provides special functions for the SD Card:<BR>
1024
<CENTER><IMG SRC="midibox_seq/cs4/disk1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG>
1025
<UL CLASS=CL>
1001 tk 1026
  <LI><B>Session Import:</B> allows to copy one or multiple patterns/songs/mixer maps/grooves/configs/bookmarks from another session:<BR>
935 tk 1027
    <CENTER><IMG SRC="midibox_seq/cs4/disk_si1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG><BR>
1028
  </LI>
1001 tk 1029
  <LI><B>Session Export:</B> allows to copy one or multiple patterns/songs/mixer maps/grooves/configs/bookmarks into another session:<BR>
935 tk 1030
    <CENTER><IMG SRC="midibox_seq/cs4/disk_se1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG><BR>
1031
  </LI>
905 tk 1032
  <LI><B>MIDI File Import:</B> allows to import MIDI files, stored in the midi/ directory of your SD Card.<BR>
1033
    <CENTER><IMG SRC="midibox_seq/cs4/disk_i1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG><BR>
1034
    All tracks are imported at once (up to 16) in the same order they are stored in the .mid file. Accordingly, track assignments can be done within the .mid file before it is imported (e.g. edit the .mid file with your DAW)<BR>
1035
    Currently only MIDI Notes and drums are supported (no CCs, no Pitchbender).<BR>
1036
    To import drum tracks, change the import mode from "Note" to "Drum". This mode especially allows to control the velocity of each step separately.<BR>
1037
    Currently drum instruments are only mapped to a pre-selection of 4/8/16 notes - this map cannot be customized yet!<BR>
1038
    Since MIDIbox SEQ is a step sequencer, notes will be quantised with a selectable resolution (16th, 32th or 64th).<BR>
1039
    Also the number of layers/drum instruments is selectable (4, 8 or 16). <BR>
1040
    Than more layers are available, than more notes can be played at the same step. In "Note" mode, all notes share the same velocity and length value, in "Drum" mode each step and instrument has a dedicated velocity value.<BR>
931 tk 1041
    If the imported track contains different velocity or length values for polyphonic played notes, and this characteristic is important, it is recommended to split the track into multiple pieces (e.g. for long and for short notes) and to import them into separate MBSEQ tracks.<BR>
1042
    Another hint: if notes of the imported track don't start exactly at the 16th/32th/64th note position (e.g. because they have a "swing" feel), it is recommended to quantize the notes in a DAW before the import.<BR>
905 tk 1043
    The swing feel can be added again after the import (GROOVE page).<BR>
1044
    All tracks will be initialized depending on the selected resolution and layers before the import is started. Than higher the resolution, or than more layers are selected, than less bars can be imported (number of bars is displayed on screen).<BR>
1045
    The MIDI port will always be set to DEFAULT during import. The MIDI channel will be set to the channel of the first played note (for each track separately).<BR>
1046
    MIDI Files can be imported while the sequencer is running. This allows you to search for a certain file, but also to try different parameters during runtime.<BR>
1047
    Here two MP3 examples of patterns that have been imported, and that are played by MBSEQ (and not by a MIDI player...).<BR>
1048
    Virus-like tunes: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_import_tunes.mp3"#ffffff**<BR>
1049
    Drum pattern at 64th resolution: **MP3**"http://www.ucapps.de/mp3/midibox_seq/mbseqv4_import_drum.mp3"#ffffff**
1050
</LI>
853 tk 1051
  <LI><B>MIDI File Export:</B> this function allows you to export Tracks, Patterns or Songs to a MIDI file, stored in the midi/ directory of your SD Card. This directory has to be created with a computer if it doesn't already exist.<BR>
1052
    <CENTER><IMG SRC="midibox_seq/cs4/disk_e1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG><BR>
1053
    By pressing the button a dialog page will be entered which allows to select the options:
1054
    <UL CLASS=CL>
1055
      <LI><B>Export:</B> use the GP encoder below this item to select "All Groups", "Group" (with pattern selection), "Track" (with track selection) or "Song" (with song selection).
1056
      <LI><B>Measures:</B> specify, how many measures should be exported
1057
      <LI><B>Steps Per Measure:</B> specify the number of steps per measure.
1058
      <LI><B>Continue:</B> continues the dialog
1059
      <LI><B>EXIT:</B> cancels the dialog and returns to the DISK page.
1060
    </UL>
1061
    <CENTER><IMG SRC="midibox_seq/cs4/disk_e3.gif" width=481 height=19 ALT="Disk"></CENTER></IMG>
1062
    After "Continue" has been pressed, the next dialog page appears which asks you to enter the filename.
1063
    <CENTER><IMG SRC="midibox_seq/cs4/disk_e4.gif" width=481 height=19 ALT="Disk"></CENTER></IMG>
1064
    If the file already exists, the dialog will ask you if it should be overwritten (YES), or if a new filename should be selected (NO).<BR>
1065
    Thereafter the .mid file will be generated and written into the midi/ directory.
1066
  <LI><B>MIDI File Import:</B> allows you to play a MIDI file with following options:
1067
    <CENTER><IMG SRC="midibox_seq/cs4/disk_p1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG>
1068
    <UL CLASS=CL>
1069
      <LI><B>Left page:</B> displays the MIDI files found in the midi/ directory. Use a GP encoder to scroll the page if more than 4 files have been found. Use a GP button to select (and play) the file.
1070
      <LI><B>Start/Stop Play:</B> plays/stops the MIDI file playback.
1071
      <LI><B>Loop:</B> enables the Loop function, so that the file will be automatically replayed once it reaches the end
1072
      <LI><B>Playmode:</B> with "exclusive" the MIDI file will be played instead of the sequencer tracks, with "parallel" it will be played together with the 16 sequencer tracks. Especially the parallel function is very powerful, as it allows you to play some static, prepared tracks (e.g. drum loops, melody lines, or a song that you previously exported) together with the 16 "normal" sequencer tracks which can be changed interactively!
1073
      <LI><B>Port:</B> the MIDI port to which the events of the .mid file will be sent.
1074
      <LI><B>EXIT:</B> exits to the DISK page.
1075
    </UL>
1076
</LI>
935 tk 1077
  <LI><B>MSD USB:</B> enables the "Mass Storage Device" driver, which turns your MIDIbox SEQ into a SD Card reader. Once enabled, the SD Card should be automatically mounted by your operating system (Windows/MacOS/Linux). USB MIDI will be disabled. The LEDs of the CS could flicker on each disk operation! It overrules the USB MIDI driver, which will be available again once the SD Card has been unmounted from the operating system.</LI>
813 tk 1078
</UL>
1079
 
853 tk 1080
<CENTER><IMG SRC="midibox_seq/cs4/disk1.gif" width=481 height=19 ALT="Disk"></CENTER></IMG>
1081
 
813 tk 1082
<H2> <IMG SRC="images/bullet.gif" ALT=""> Port Mute Page (Shortcut: UTILITY (F1)->PMute)</H2>
1083
 
1084
<P CLASS=DESC>MIDI ports can be individually disabled - requested by several users:
1085
<CENTER><IMG SRC="midibox_seq/cs4/pmute1.gif" width=481 height=19 ALT="Port Mute"></CENTER></IMG></P>
1086
 
1087
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Menu (Shortcut: MENU->Fx</H2>
1088
<P CLASS=DESC>Menu to enter the local/global effects pages which are described below:
1089
<CENTER><IMG SRC="midibox_seq/cs4/fx_menu.gif" width=481 height=19 ALT="Fx Menu"></CENTER></IMG></P>
1090
 
1091
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Echo</H2>
1092
<P CLASS=DESC>This is one of the main new features of MIDIbox SEQ V4 - thanks to the mighty MIDI event scheduler the echo function works very accurate, even on quick parameter or pattern changes:
1093
<CENTER><IMG SRC="midibox_seq/cs4/fx_echo.gif" width=481 height=19 ALT="Fx Echo"></CENTER></IMG></P>
1094
<UL CLASS=CL>
1095
  <LI><B>Repeats:</B> selects how many times a played MIDI event should be repeated (0..15).</LI>
935 tk 1096
  <LI><B>Delay:</B> defines the delay between each repeat (64T, 64, 32T, 64d, 32, 16T, 32d, 16, 8T, 16d, 8, 4T, 8d, 4, 2T, 4d, 2, 1T, 2d, 1, Rnd1 and Rnd2)</LI>
813 tk 1097
  <LI><B>Velocity Level:</B> defines the initial velocity level of the first repeating note</LI>
1098
  <LI><B>Feedback Velocity:</B> defines the gradual change of the velocity level for each repeat between 0..200%</LI>
1099
  <LI><B>Feedback Note:</B> defines the gradual change of note stepsonr each repeat between -24..+24, optionally random (RND).<BR>
1100
    Very powerful in conjunction with Force-to-Scale!!!</LI>
1101
  <LI><B>Gatelength:</B> defines the gradual change of the gatelength on each repeat between 0..200%<BR>
1102
  <LI><B>Ticks:</B> defines the gradual change of the delay between each repeat between 0..200%<BR>
1103
</UL>
814 tk 1104
<P CLASS=DESC>TODO MP3 (however, the LFO demo below gives some impressions about the usage of the Echo Fx as well!)</P>
813 tk 1105
 
1106
 
1107
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Humanizer</H2>
1108
 
1109
<P CLASS=INFO>Allows you to select following options:<BR>
1110
<CENTER><IMG SRC="midibox_seq/cs4/fx_humanizer.gif" width=481 height=19 ALT="Fx Humanizer"></CENTER></IMG>
1111
<UL CLASS=CL>
1112
  <LI><B>Rnd. Intensity:</B> this is some kind of "humanizer" which allows to vary the parameters of a MIDI event randomly. The higher the "intensity" value, the higher the random variation.</LI>
1113
  <LI><B>Note:</B> Enables/Disables the random variation of key values</LI>
1114
  <LI><B>Vel/CC:</B> Enables/Disables the random variation of velocity or CC values</LI>
1115
  <LI><B>Length:</B> Enables/Disables the random variation of the gatelength</LI>
1116
</UL></P>
1117
 
1118
<P CLASS=DESC>TODO MP3</P>
1119
 
1120
<P CLASS=INFO>Allows you to limit the note range for each indiviual track:<BR>
1121
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Limiter</H2>
1122
<CENTER><IMG SRC="midibox_seq/cs4/fx_limiter.gif" width=481 height=19 ALT="Fx Limiter"></CENTER></IMG></P>
1123
 
1124
<P CLASS=DESC>If a note is outside the range, it will be wrapped around the octave for musical results.</P>
1125
<P CLASS=DESC>TODO MP3</P>
1126
 
1127
 
1128
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx LFO</H2>
1129
<P CLASS=INFO>The LFO effect allows to automate periodical changes of various parameters:<BR>
1130
<CENTER><IMG SRC="midibox_seq/cs4/fx_lfo.gif" width=481 height=19 ALT="Fx LFO"></CENTER></IMG></P>
1131
<UL CLASS=CL>
1132
  <LI><B>Wave:</B> selects the waveform: Sine, Triangle, Sawtooth, Pulse 5%..95%</LI>
1133
  <LI><B>Amplitude:</B> selects the amplitude from -128 to +127</LI>
1134
  <LI><B>Phase:</B> selects the waveform phase after the LFO has been reset</LI>
814 tk 1135
  <LI><B>Steps:</B> selects the period of the LFO waveform synchronized to the steps of a track (1..256) - this parameter automatically synchronizes to the MIDI clock depending on the BPM rate</LI>
813 tk 1136
  <LI><B>Reset:</B> defines after how many steps the LFO should be reset</LI>
1137
  <LI><B>OneShort:</B> if enabled, the LFO waveform will only be processed once until the next reset</LI>
1138
  <LI><B>Note:</B> applies the LFO waveform over all Note values of the track (use low amplitudes values!) - especially interesting in conjunction with Force-to-Scale and the Limiter Fx!</LI>
1139
  <LI><B>Velocity:</B> applies the LFO waveform over the Velocity value of the track (use high amplitudes values!)</LI>
1140
  <LI><B>Length:</B> applies the LFO waveform over the Gatelength (why not...)</LI>
1141
  <LI><B>Extra CC#:</B> allows to define an CC number which will directly send the LFO value</LI>
1142
  <LI><B>Offset:</B> allows to increase/decrease the LFO offset within the range of 0.127</LI>
931 tk 1143
  <LI><B>PPQN:</B> defines the update rate of the CC parameter (3..384 ppqn). Than higher the value, than more MIDI traffic will be produced! A value >= 96 ppqn is only recommended for virtual synths controlled via MIDI USB!</LI>
813 tk 1144
</UL></P>
1145
 
814 tk 1146
<P CLASS=DESC>In following demo video (which you probably already know) the live usage of a LFO is demonstrated with different waveforms, frequencies, CC modulation, Echo Fx, transposer and force-to-scale (LFO part starts at 2:05).<BR>
1147
<center><object width="400" height="300"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=5250512&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=5250512&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object><p><a href="http://vimeo.com/5250512">MIDIbox SEQ V4 Teaser #2</a> from <a href="http://vimeo.com/ucapps">Thorsten Klose</a> on <a href="http://vimeo.com">Vimeo</a>.</p></center></P>
813 tk 1148
 
814 tk 1149
 
813 tk 1150
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Loop</H2>
1151
<P CLASS=DESC>Is this an "effect" or a "tool" which is useful while editing long sequences... decide by yourself:
1152
<CENTER><IMG SRC="midibox_seq/cs4/fx_loop.gif" width=481 height=19 ALT="Fx Loop"></CENTER></IMG></P>
1153
<UL CLASS=CL>
1154
  <LI><B>Global Loop Mode:</B> following modes are supported:
1155
    <UL CLASS=CL>
1156
      <LI><B>All Tracks/Step View:</B> loops all tracks around the visible step view</LI>
1157
      <LI><B>All Tracks/Static View:</B> loops all tracks around the selected Offset/Step range</LI>
1158
      <LI><B>Selected Track/Step View:</B> loops the selected track around the visible step view</LI>
1159
      <LI><B>Selected Track/Static View:</B> loops the selected track around the selected Offset/Step range</LI>
1160
    </UL>
1161
  </LI>
1162
  <LI><B>Loop:</B> enables/disables the Loop function. Can alternatively be switched via MENU+SCRUB buttons.
1163
</UL>
1164
 
1165
<H2> <IMG SRC="images/bullet.gif" ALT=""> Fx Scale</H2>
1166
<CENTER><IMG SRC="midibox_seq/cs4/fx_scale.gif" width=481 height=19 ALT="Fx Scale"></CENTER></IMG>
1167
 
1168
<P CLASS=INFO>This page allows to configure the scale which should be used by the Force-to-Scale function:<BR>
1169
<UL CLASS=CL>
910 tk 1170
  <LI><B>Control:</B> the scale and root note can either be controlled globally or pattern based. In distance to the global scale/root (which is stored in the global configuration of a session), the pattern based scale/root is located within the G1/G2/G3 or G4 pattern and will be automatically changed when a new pattern is selected.<BR>
813 tk 1171
Only one group can control the scale and root note - it can be selected with this menu item.</LI>
1172
  <LI><B>Root:</B> selects the root note (C, C#, D, D#, ..., B) of the scale. Optionally the root note can be directly controlled from a MIDI keyboard. In this case it is the base note which is also forwarded to the transposer. KEYB is the default setting.</LI>
1173
  <LI><B>Selected Scale:</B> allows you to select one of 166 (!!!) scales, which are used by all tracks with enabled "force scale" option.<BR>Scales are counted from zero so that the numbers are matching with the CC#3 value.<BR> Thanks to Stryd One for providing all the scale definitions! :-)</LI>
1174
</UL>
1175
<P CLASS=INFO>Sidenote reg. the global scale: when "Global" control mode is selected, the scale can also be changed from an external MIDI device via CC#3, and especially via internal loopback. This means, that a track can change the scale dynamically if it outputs CC#3s to the Loopback port.</P>
1176
 
927 tk 1177
 
932 tk 1178
 
1179
<H2> <IMG SRC="images/bullet.gif" ALT=""> CV Configuration Page</H2>
1180
<CENTER><IMG SRC="midibox_seq/cs4/cv1.gif" width=481 height=19 ALT="CV"></CENTER></IMG>
1181
 
1182
<P CLASS=INFO>This page allows to select the AOUT/AOUT_LC/AOUT_NG interface, to configure CV channel and gate parameters, and to configure the DIN Sync Clock output.<BR>
1183
 
1184
<UL CLASS=CL>
1185
  <LI><B>CV:</B> selects the CV channel (1..8)
1186
  <LI><B>Curve:</B> selects the output curve: V/Oct, Hz/V, Inverted
1187
  <LI><B>Slew Rate:</B> allows to configure a slew rate (slack) in the range of 0..255 mS
1188
  <LI><B>PRng:</B> sets the pitch range for pitch bender events (normaly 2, use 12 or 24 to sweep over one, resp. two octaves)
1189
  <LI><B>Gate:</B> sets the gate polarity (positive or negative)
1190
  <LI><B>Calibr.:</B> allows to force different output voltages for calibration (Min/Middle/Max/1V, 2V, 4V, 8V)
1191
  <LI><B>PPQN:</B> defines the output rate of the DIN Sync Clock output pin at J5C.A8 of the MBHP_CORE_STM32 module (1, 2, 3, 4, 6, 8, 12, 16, 24, 32, 48, 96, 192, 384 ppqn)</LI>
1192
  <LI><B>Width:</B> sets the pulsewidth of the DIN Sync Clock (1..255 mS)</LI>
1193
  <LI><B>Module:</B> selects the AOUT module which is connected to J19 of the core module (AOUT, AOUT_LC or AOUT_NG)</LI>
1194
</UL>
1195
 
1196
 
1197
 
927 tk 1198
<H2> <IMG SRC="images/bullet.gif" ALT=""> Ethernet (OSC) Page</H2>
1199
<CENTER><IMG SRC="midibox_seq/cs4/eth1.gif" width=481 height=19 ALT="Ethernet"></CENTER></IMG>
1200
 
1201
<P CLASS=INFO>This page allows to configure the IP settings of the MBHP_ETH interface, and the remote settings of the OSC server.<BR>
1202
 
1089 tk 1203
<P CLASS=INFO>Background informations about the OSC integration into MIDIbox applications can be found at <A HREF="midibox_osc.html">this page</A>.
1204
 
927 tk 1205
<P CLASS=INFO>All changes won't take effect immediately, but have to be confirmed by pressing one of the "Enter" soft-buttons (GP8 and GP16)! They will be stored in the global configuration file /MBSEQ_GC.V4 on SD Card.</P>
1206
 
1207
<UL CLASS=CL>
1208
  <LI><B>DHCP:</B> if enabled, the remote IP, network mask and gateway will be requested from a DHCP server in the network. If disabled, these settings can be entered manually
1209
  <LI><B>Ethernet Configuration Parameters:</B>
1210
    <UL>
1211
      <LI><B>Local IP:</B> (only if DHCP not enabled): sets the IP of MIDIbox SEQ and should be unique in the network
1212
      <LI><B>Netmask:</B> (only if DHCP not enabled): sets the netmask of your LAN
1213
      <LI><B>Gateway:</B> (only if DHCP not enabled): sets the gateway IP (default router)
1214
    </UL>
1215
  <LI><B>OSC Configuration Parameters:</B>
1216
    <UL>
931 tk 1217
      <LI><B>OSC Port:</B> 4 ports are available (OSC1..OSC4), each one can be configured with a different IP and port settings.
927 tk 1218
      <LI><B>Remote IP:</B> sets the IP of the host to which OSC packets should be sent/received
1219
      <LI><B>Remote Port:</B> sets the port number to which OSC packets will be sent
1220
      <LI><B>Local Port:</B> sets the port number over which OSC packets will be received
1089 tk 1221
      <LI><B>Tx Mode:</B> selects the transfer mode (see <A HREF="midibox_osc.html">this page</A> for supported formats)
927 tk 1222
    </UL>
1223
</UL>
1224
 
935 tk 1225
 
1001 tk 1226
 
1227
<H2> <IMG SRC="images/bullet.gif" ALT=""> Bookmark Page</H2>
1228
<CENTER><IMG SRC="midibox_seq/cs4/bm1.gif" width=481 height=19 ALT"Bookmarks"></CENTER></IMG>
1229
 
1230
<P CLASS=DESC>Ok, now you've probably walked through so many pages, how to remember the most favourite ones?<BR>
1231
Use Bookmarks!<BR>
1232
The bookmark pages is entered by pressing MENU+SELECT, or a dedicated button which is assigned in your MBSEQ_HW.V4 file (e.g. the hwcfg/wilba/MBSEQ_HW.V4 file presets this functions to the F1 button)</P>
1233
 
1234
<P CLASS=DESC>Inside this menu, press a GP button (shortly) to recall a bookmark, press&hold a GP button for 3 seconds to store a bookmark</P>
1235
 
1236
<P CLASS=DESC>The bookmark function stores following UI settings:
1237
<UL CLASS=CL>
1238
  <LI> Bookmark name
1239
  <LI> Current page
1240
  <LI> Group
1241
  <LI> Tracks
1242
  <LI> Mutes
1243
  <LI> Parameter Layer
1244
  <LI> Trigger Layer
1245
  <LI> Instrument
1246
  <LI> Step View
1247
  <LI> Step
1248
  <LI> Edit View
1249
  <LI> Solo/All/Fast/Metronome/Loop/Follow button mode
1250
</UL>
1251
 
1252
<P CLASS=DESC>The first 8 "global" Bookmarks are stored into the MBSEQ_BM.V4 file of the root directory, the remaining bookmarks are stored into the MBSEQ_BM.V4 file of the session directory. Both files can be edited with a common text editor.<BR>
1253
This is the only way to change a bookmark name (5 characters)</P>
1254
 
1255
<P CLASS=DESC>It's possible to prevent, that a certain UI parameter will be overwritten by a bookmark. This can (only) be done by editing the MBSEQ_BM.V4 file:<BR>
1256
Just replace the '+' sign at the beginning of the parameter name by a '-' sign.</P>
1257
 
1258
<P CLASS=DESC>Typical configuration slot:<BR>
1259
<PRE>
1260
####################
1261
Slot 1
1262
Name Def.
1263
####################
1264
+Page 16
1265
+Group 1
1266
+Tracks 1000000000000000
1267
+Mutes 0000000000000000
1268
+ParLayer A
1269
+TrgLayer A
1270
+Instrument 1
1271
+StepView 1
1272
+Step 1
1273
+EditView 0
1274
+Solo 0
1275
+All 0
1276
+Fast 0
1277
+Metronome 0
1278
+LoopMode 0
1279
+FollowMode 0
1280
</PRE>
1281
 
1282
<P CLASS=DESC>You could turn this into an "all tracks selected" bookmark by writing:
1283
<PRE>
1284
####################
1285
Slot 1
1286
Name AllT
1287
####################
1288
-Page 16
1289
-Group 1
1290
+Tracks 1111111111111111
1291
-Mutes 0000000000000000
1292
-ParLayer A
1293
-TrgLayer A
1294
-Instrument 1
1295
-StepView 1
1296
-Step 1
1297
-EditView 0
1298
-Solo 0
1299
-All 0
1300
-Fast 0
1301
-Metronome 0
1302
-LoopMode 0
1303
-FollowMode 0
1304
</PRE>
1305
 
1306
<P CLASS=DESC>This will only change the tracks, all other parameters won't be touched!
1307
 
796 tk 1308
FOOTER