Subversion Repositories svn.mios

Rev

Rev 1162 | Rev 1200 | Go to most recent revision | Details | Compare with Previous | Last modification | View Log | RSS feed

Rev Author Line No. Line
919 tk 1
HEADER 3 MIDIbox SEQ V4 User Manual --- 16x16+X Button/LED Matrix
2
 
3
<P CLASS=INFO><B><A HREF="midibox_seq_manual.html">Back to main page...</A></B></P>
4
 
5
<H1>MIDIbox SEQ V4</H1>
6
<H1>User Manual --- 16x16+X Button/LED Matrix</H1>
7
 
8
<center>
9
<object width="400" height="300"><param name="allowfullscreen" value="true" /><param name="allowscriptaccess" value="always" /><param name="movie" value="http://vimeo.com/moogaloop.swf?clip_id=11768389&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" /><embed src="http://vimeo.com/moogaloop.swf?clip_id=11768389&amp;server=vimeo.com&amp;show_title=1&amp;show_byline=1&amp;show_portrait=0&amp;color=&amp;fullscreen=1" type="application/x-shockwave-flash" allowfullscreen="true" allowscriptaccess="always" width="400" height="300"></embed></object>
10
</center>
11
 
920 tk 12
<H2>General informations and discussions about this project</H2>
13
 
919 tk 14
<P CLASS=INFO><A HREF="http://midibox.org/forums/index.php?/forum/43-midibox-blm/" TARGET="_blank">Link to special "MIDIbox BLM" forum section</A></P>
15
 
920 tk 16
<H2>Supported features by MIDIbox SEQ V4</H2>
919 tk 17
 
920 tk 18
<P CLASS=INFO>MIDIbox BLM doesn't provide any intelligence to play sequences by itself, instead it only acts as a control surface enhancement for the host application such as <A HREF="midibox_seq.html">MIDIbox SEQ V4</A>. This means in other words, that all features are implemented at the host side.</P>
19
 
20
<P CLASS=INFO>Following BLM modes are supported by MBSEQ. You can switch between the modes by holding the SHIFT button while pressing an "extra column" button.
21
 
22
<UL CLASS=CL>
23
  <LI><B>Grid mode:</B> displays a 16 step view of the selected track. The usage depends on the parameter layer assignment:
24
    <UL CLASS=CL>
25
      <LI><B>Note Layer:</B> each 16x16 row will play a different note. The 16 notes per column are pre-selected based on the current scale (MENU+FX-&gt;Scale) to increase the octave range, and to simplify the entry of harmonic notes.<BR>
26
      <B>Important:</B> one note per step can be selected if the track only contains a single note layer (default). By adding more note layers in the MENU+Event page it's possible to select multiple notes per step for polyphonic sequences.
27
      <LI><B>Any other parameter layer</B> such as velocity/length/CC/PitchBender/Roll/Probability/etc.: each 16x16 column works like a VU meter.
28
      <LI><B>Drum Tracks:</B> each 16x16 row is assigned to a different note (drum instrument) as configured in the MENU+Event page.<BR>
29
          <B>Hint:</B> instead of drums you could also play a synth. Since each note can be predefined, you are able to create your own "scale" this way.
30
      <LI><B>Extra Column:</B> selects the track that should be edited. Push the button twice to mute/unmute a track.
31
      <LI><B>Extra Row:</B> selects the step view. Increase the track length to play more step views. Use loop mode or the section function to play only a single step view.
1183 tk 32
      <LI><B>ALT+Extra Row:</B> selects the octave
920 tk 33
      <LI><B>Planned future enhancements:</B> pressing SHIFT+16x16 button should set accent, pressing SHIFT+extra row button should select the section that should be played
34
    </UL>
35
 
36
  <LI><B>Track mode:</B> displays a 16 step view of all tracks.
37
    <UL CLASS=CL>
38
      <LI><B>16x16 buttons:</B> set/clear a trigger.<BR>
39
      <LI><B>Extra Column:</B> selects a track. Push the button twice to mute/unmute a track.
40
      <LI><B>Extra Row:</B> selects the step view. Increase the track length to play more step views. Use loop mode or the section function to play only a single step view.
1183 tk 41
      <LI><B>ALT+Extra Row:</B> selects the trigger layer
920 tk 42
      <LI><B>Planned future enhancements:</B> pressing SHIFT+16x16 button should set accent, pressing SHIFT+extra row button should select the section that should be played
43
    </UL>
44
 
45
  <LI><B>Pattern mode:</B> displays the patterns of all 4 groups.
46
    <UL CLASS=CL>
47
      <LI><B>16x16 buttons:</B> each quarter directly selects the pattern of a group (up to 64 patterns per group)
1183 tk 48
      <LI><B>ALT+16x16 buttons:</B> each quarter stores the pattern into the selected slot
920 tk 49
      <LI><B>16x16 LEDs:</B> green: pattern is selected for next measure, red: pattern is played, yellow: pattern is selected and played
50
      <LI><B>Extra Column:</B> selects a track. Push the button twice to mute/unmute a track.
51
      <LI><B>Extra Row:</B> no function yet.
52
      <LI><B>Planned future enhancements:</B> pressing SHIFT+16x16 button should select the pattern synchronized to measure independent from the global "synch-to-measure" function.<BR>
53
            The extra row could select a song phrase (so that all 4 groups change to predefined patterns)
54
    </UL>
55
 
56
  <LI><B>Keyboard mode:</B> allows to play notes of the selected track "live".
57
    <UL CLASS=CL>
58
      <LI><B>16x16 buttons:</B> each 16x16 column will play a different note. Than higher the row, than higher the velocity of the played note. The 16 notes per column are pre-selected based on the current scale (MENU+FX-&gt;Scale) to increase the octave range, and to simplify the entry of harmonic notes.<BR>
59
      <LI><B>Extra Column:</B> selects a track. Push the button twice to mute/unmute a track.
60
      <LI><B>Extra Row:</B> sends a note to the transposer (starting from C-2, unscaled)
1183 tk 61
      <LI><B>ALT+Extra Row:</B> selects the octave
920 tk 62
      <LI><B>Planned future enhancements:</B> pressing SHIFT+16x16 button should play&hold a note until the same column is selected again.<BR>
63
            Support for playing notes on drum tracks.
64
    </UL>
65
 
972 tk 66
  <LI><B>303 mode:</B>
67
   <UL CLASS=CL>
68
     <LI> first row selects accent
69
     <LI> second row selects glide
70
     <LI> third and fourth row select octave (4 different selections)
71
     <LI> remaining rows select key of octave and set/clear gate
72
    </UL>
73
 
920 tk 74
  <LI><B>Stop:</B> stops the sequencer
75
  <LI><B>Start:</B> starts/restarts the sequencer
76
</UL>
77
 
78
<P CLASS=INFO>Following extensions are planned for future releases:</P>
79
<UL CLASS=CL>
80
  <LI><B>Keyboard Recording mode:</B> live recording function
81
  <LI><B>Transposer mode:</B> direct access to all 4 Transposer/Arpeggiator busses
82
  <LI><B>Keyboard Split mode:</B> play two instruments with upper/lower half of 16x16 matrix (with reduced velocity resolution)
83
  <LI><B>Keyboard Track mode:</B> all 16 tracks can be played "live" with only a single velocity value. Will be nice for quick soundchecks.
84
  <LI><B>Loop mode:</B> all 16 tracks are displayed like in "Track" mode. By pressing one button the last step can be defined (restart at first step once this step has been reached). By pressing two buttons the sequencer will loop between the steps.
85
  <LI><B>Mixer mode:</B> direct control of CCs and program changes like in the MENU+Mixer page
86
</UL>
87
 
88
 
931 tk 89
<H2>Hardware and Connection to MIDIbox SEQ</H2>
90
 
1004 tk 91
<P CLASS=DESC>The MIDIbox BLM firmware is running on a <A HREF="mbhp_core.html">MBHP_CORE</A> module, and communicates with MIDIbox SEQ via MIDI. It's possible to add a third MIDI IN/OUT pair to the MBHP_CORE_STM32 resp. MBHP_CORE_LPC17 module so that the original two IO ports can still be used for other connections.</P>
1042 tk 92
<P CLASS=DESC>Here a <A HREF="mbhp/mbhp_core_stm32_midi3_extension.pdf" TARGET="_blank">schematic for MIDI IN3/MIDI OUT3 extension for STM32</A>, here a <A HREF="mbhp/mbhp_core_lpc17_midi3_midi4_extension.pdf" TARGET="_blank">schematic for MIDI IN3/MIDI OUT3 extension for LPC17</A> here an alternative <A HREF="midibox_blm/blm_connector_mbseq.pdf" TARGET="_blank">schematic for a special BLM connector</A> which allows to power the BLM via a (strong) USB hub, or from the MBSEQ PSU (+5V/Ground connected to MBHP_CORE::J2, MIDI OUT3 connected to MIDI IN of MBHP_CORE module, MIDI IN3 to MIDI OUT of the MBHP_CORE module - take care for the polarities!)</P>
931 tk 93
</UL>
94
 
95
<A HREF="midibox_blm/blm_connector_mbseq.pdf" TARGET="_blank">schematic for BLM connector</A>
96
 
963 tk 97
<P CLASS=DESC>No special configuration has to be done in the MBSEQ_HW.V4 file. Please don't be confused about BLM_* and BLM8x8_* parameters. BLM_* parameters configure the (expired) 4x16 BLM which was provided by MBSEQ V3 but isn't so powerful as BLM16x16+X. BLM8x8_* parameters configure a special matrix for Wilba's Frontpanel to save some shift registers.</P>
931 tk 98
 
1031 tk 99
<P CLASS=DESC>The only configuration which is required has to be done in the MIDI-&gt;Misc menu as shown in this picture:<BR>
963 tk 100
<CENTER><IMG SRC="midibox_seq/cs4/midi4.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG></P>
101
<P CLASS=DESC>Once selected, MIDIbox SEQ V4 will start an auto-detection at this MIDI port and configure the BLM16x16+X firmware remotely.</P>
102
<P CLASS=DESC><B>Sidenote:</B> the term "BLM_SCALAR" is sometimes used instead of BLM16x16+X to highlight the scalability of the hardware concept - in future different BLM dimensions could be provided, MBSEQ V4 is prepared for detecting the size w/o the need for additional configurations.</P>
103
 
920 tk 104
<H2>Virtual BLM16x16+X</H2>
105
 
106
<P CLASS=INFO>The virtual MIDIbox BLM16x16+X runs on a Windows PC or Mac and allows you to evaluate the new possibilities before building the hardware:
107
 
1183 tk 108
<CENTER><IMG SRC="midibox_blm/midibox_blm16x16_virtual.png" width=853 height=830></CENTER></P>
920 tk 109
 
110
<P CLASS=INFO>To establish the communication between MIDIbox SEQ and the BLM emulation, select an unused USB MIDI port (e.g. USB4) in the BLM application and in the MENU+MIDI menu of your MIDIbox SEQ V4:
111
<CENTER><IMG SRC="midibox_seq/cs4/midi4_usb4.gif" width=481 height=19 ALT="MIDI Cfg"></CENTER></IMG>
112
 
1183 tk 113
<P CLASS=INFO><B>Important:</B> the BLM modes are normaly selected with the SHIFT button. Since it isn't possible to select two button functions with a mouse (if you don't own a touchscreen...), the SHIFT function can alternatively be activated with the space key of your computer keyboard.<BR>
114
<B>/Update:</B> since v1.1 the shift button functions are selectable (and displayed) with a second extra column at the left side of the BLM.
920 tk 115
 
116
<UL CLASS=CL>
1183 tk 117
  <LI><A HREF="midibox_blm/MIDIbox_BLM_1_3.zip">MIDIbox_BLM_1_3 for WinXP/Vista/Win7/Win8</A>
118
  <LI><A HREF="midibox_blm/MIDIbox_BLM_1_3.app.zip">MIDIbox_BLM_1_3.app for MacOS 10.5/10.6/10.7/10.8/10.9</A>
119
  <LI><A HREF="midibox_blm/MIDIbox_BLM_1_3.tar.gz">MIDIbox_BLM_1_3 for Linux at 32bit</A><BR>
120
      If you are running Linux in 64bit mode, you may have to install i386 libraries with:<BR>
121
      <I>apt-get install libfreetype6-dev:i386 libasound2-dev:i386 libasound2-plugins:i386 libgl1-mesa-glx:i386 libgl1-mesa-dev:i386</I>
920 tk 122
</UL>
123
 
124
 
1031 tk 125
<H2>Lemur based BLM16x16+X for iPad</H2>
126
 
127
<P CLASS=INFO>After I got my first experiences with <A HREF="http://itunes.apple.com/de/app/lemur/id481290621?mt=8" TARGET="_blank">Lemur for iPad</A> I must say that this software is really a master piece!</P>
128
<P CLASS=INFO>In distance to <A HREF="http://itunes.apple.com/de/app/touchosc/id288120394?mt=8" TARGET="_blank">TouchOSC</A> the controllers are fully programmable with an easy to learn script language.</P>
129
<P CLASS=INFO>And in distance to OSC it's also possible to work with MIDI at low-level -&gt; means: at bit basis (e.g. a MBSID Editor is feasible)!</P>
130
 
1033 tk 131
<P CLASS=INFO>Within a couple of hours I was able to implement a complete BLM16x16+X emulation:</P>
1031 tk 132
<CENTER><IMG SRC="midibox_blm/blm16x16+x_lemur3.png" width=800 ALT="Lemur"></CENTER></IMG></P>
133
 
134
<P CLASS=INFO>The user interface feels much better than the Juce implementation, and due to the easy to use Lemur Editor it's possible for everybody to customize the user interface!</P>
135
 
136
<P CLASS=INFO>So, if you own an iPad, and already bought Lemur, just install this template:
137
<UL CLASS=CL>
1183 tk 138
  <LI><A HREF="midibox_blm/MIDIbox_BLM16x16+X_v1_004.zip">MIDIbox_BLM16x16+X_v1_004.zip for Lemur</A>
1031 tk 139
</UL>
140
 
141
<P CLASS=INFO>Thereafter start the Lemur Daemon for a MIDI;lt&-;gt&OSC connection, and on MBSEQV4 configure the BLM port (MIDI-;gt&Misc page)<BR>
142
E.g. to USB3 like I did...</P>
143
 
144
<P CLASS=INFO>This MIDI port can be select in Lemur as well:</P>
145
<CENTER><IMG SRC="midibox_blm/blm16x16+x_lemur2.jpg" width=800 ALT="Lemur"></CENTER></IMG></P>
146
 
1033 tk 147
<P CLASS=INFO>Now you are ready for having some Multitouch BLM fun!</P>
1031 tk 148
<CENTER><IMG SRC="midibox_blm/blm16x16+x_lemur1.jpg" width=800 ALT="Lemur"></CENTER></IMG></P>
149
 
1033 tk 150
<P CLASS=INFO><B>Update:</B> with MBSEQV4L V4.055 the BLM is also supported by <A HREF="midibox_seq_lite.html">MIDIbox SEQ Lite</A>!</P>
151
 
152
<P CLASS=INFO>Sequences can be directly entered in Grid or 303 mode.<BR>
153
Patterns can be selected in a grid as well (like known from Ableton Live).<BR>
154
The keyboard mode allows to play a synth directly, but can also be used for recording!</P>
155
 
156
<P CLASS=INFO>Setup procedure (commands can be entered in MIOS Terminal):<BR>
157
(assumed that iPad IP address is 192.168.1.110):
158
<UL CLASS=CL>
159
<LI> set osc_remote 3 192.168.1.110
160
<LI> set osc_local_port 3 8000
161
<LI> set osc_remote_port 3 8000
162
<LI> set osc_mode 3 1
163
<LI> set blm_port OSC3
164
<LI> store
165
</UL>
166
 
167
<P CLASS=INFO>In Lemur, set the IP address of your MIDIbox with port 8000</P>
168
 
169
<CENTER><IMG SRC="midibox_blm/blm16x16+x_lemur4.jpg" width=800 ALT="Lemur"></CENTER></IMG></P>
170
 
919 tk 171
FOOTER